On Wed, Jan 05, 2022 at 10:10:03PM +0100, Tommaso Merciai wrote: > On Wed, Jan 05, 2022 at 05:52:23PM -0300, Fabio Estevam wrote: > > Hi Tommaso, > > > > On Wed, Jan 5, 2022 at 5:47 PM Tommaso Merciai <[email protected]> > > wrote: > > > > > Hi Fabio, > > > Thanks, I test your patch on basic and extended model. Below some logs > > > seems all work properly. I hope I helped the cause :) > > > > Yes, thanks a lot!
It's a pleasure, nice team work :) Tommaso > > > > > - BASIC log: > > > ------------------------------------------------------------------------- > > > U-Boot 2022.01-rc4-00034-g19f31e718f-dirty (Jan 05 2022 - 21:38:32 +0100) > > > > > > CPU: Freescale i.MX6SX rev1.2 996 MHz (running at 792 MHz) > > > CPU: Extended Commercial temperature grade (-20C to 105C) at 32C > > > Reset cause: POR > > > Model: UDOO Neo Basic > > > > I assume you have only applied 1/2 and not 2/2. > > > > With 2/2 applied the Model line should not be printed. > > > > Thanks > > Yes, Fabio. Sorry, I forgot. Below test with 2/2. > > U-Boot 2022.01-rc4-00034-g19f31e718f-dirty (Jan 05 2022 - 22:07:22 +0100) > > CPU: Freescale i.MX6SX rev1.2 996 MHz (running at 792 MHz) > CPU: Extended Commercial temperature grade (-20C to 105C) at 45C > Reset cause: POR > Board: UDOO Neo BASIC > I2C: ready > DRAM: 512 MiB > PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 > MMC: FSL_SDHC: 1, FSL_SDHC: 2 > Loading Environment from MMC... OK > In: serial > Out: serial > Err: serial > Net: eth0: ethernet@2188000 > Hit any key to stop autoboot: 0 > > > U-Boot 2022.01-rc4-00034-g19f31e718f-dirty (Jan 05 2022 - 22:07:22 +0100) > > CPU: Freescale i.MX6SX rev1.2 996 MHz (running at 792 MHz) > CPU: Extended Commercial temperature grade (-20C to 105C) at 35C > Reset cause: POR > Board: UDOO Neo EXTENDED > I2C: ready > DRAM: 1 GiB > PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 > MMC: FSL_SDHC: 1, FSL_SDHC: 2 > Loading Environment from MMC... OK > In: serial > Out: serial > Err: serial > Net: > Error: ethernet@2188000 address not set. > No ethernet found. > > Hit any key to stop autoboot: 0 > > Thanks, > Tommaso
