Le 22/11/2010 16:02, Premi, Sanjeev a écrit : >> -----Original Message----- >> From: Albert ARIBAUD [mailto:albert.arib...@free.fr] >> Sent: Monday, November 22, 2010 8:02 PM >> To: Premi, Sanjeev >> Cc: Wolfgang Denk; u-boot@lists.denx.de >> Subject: Re: Build failures with older toolchain >> >> Le 22/11/2010 14:50, Premi, Sanjeev a écrit : >>> Tried the same stuff for overo and no issues! >>> >>> Since there linker scripts are same between omap3_evm, omap3_beagle >>> and omap3_overo, only difference could have been board >> specific code. >>> >>> I was hoping to find some code that might be offending the linker; >>> unable to find by inspection, I reduced the default configuration >>> for the evm to as low as I could - still see: >>> >>> arm-none-linux-gnueabi-ld: section .bss [800fe358 -> >> 800fee1b] overlaps section .rel.dyn [800fe358 -> 8010076f] >>> arm-none-linux-gnueabi-ld: u-boot: section .bss vma >> 0x800fe358 overlaps previous sections >>> >>> I am still not sure why the start of .bss and .rel.dyn for >> omap3_evm start at same address >> >> That is because they are voluntarily overlapped. This looks like the >> patch I recently did, which in essence does overlap BSS (which is not >> used before relocation) and relocation tables (which are not >> used after >> relocation) so that the FLASH and RAM footprint remain minimal. > > [sp] Are you referring to this patch? > > http://git.denx.de/?p=u-boot.git;a=commitdiff;h=aaeb0a890a050b58be87fa2b165eec5fa947dc86 > > I see the change for arm926ejs/u-boot.lds and armv7/u-boot.lds > to be similar. > > Your commit mentions about the new ld vs. old; I had seen this > earlier as well. It was the reason for me to try CodeSourcery > Lite 2010-q1 but there I get a different error - mentioned in my > first post. > > Which toolchain version are you using?
I usually try the 2009q3 Code Sourcery and the ELDK 4.2 toolchains. Can you compare the ld invocation command lines for a failure case and a success case? The difference could be in the linker options. Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot