On 1/24/22 07:17, Tony Dinh wrote:
Pogoplug V4 specifications: Kirkwood 88F6192 SoC 800 MHz CPU 1Gbs Ethernet 128 MB RAM 128 MB NAND 1x USB 2.0 2x USB 3.0 (on PCIe bus) 1 SDHC slot 1x External SATA port (USM enclosure form factor slot) Changes in v5: - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Add board_eth_init() to use uclass mvgbe to handle all Ethernet PHY configuration and bring up the network. Changes in v4: - Remove CONFIG_FEATURE_COMMAND_EDITING and ifdefs for CMD_NET in include header Changes in v3: - Migrate symbols from board include header to Kconfig - Squash board file small patches into one patch - Migrate config symbols from board include header to defconfig - Remove obsolete config symbols from header file - Don't use ifdefs for unselectable config symbols in header file Changes in v2: - Use mainline Linux DTS version - Move constants to .c file and remove header file - Use canonical format for defconfig file Tony Dinh (3): arm: kirkwood: Pogoplug-V4 : Add DTS files arm: kirkwood: Pogoplug-V4 : Add Kconfig files arm: kirkwood: Pogoplug-V4 : Add board implementation files arch/arm/dts/Makefile | 1 + arch/arm/dts/kirkwood-pogoplug-series-4.dts | 180 ++++++++++++++++++++ arch/arm/mach-kirkwood/Kconfig | 6 + board/cloudengines/pogo_v4/Kconfig | 16 ++ board/cloudengines/pogo_v4/MAINTAINERS | 6 + board/cloudengines/pogo_v4/Makefile | 10 ++ board/cloudengines/pogo_v4/kwbimage.cfg | 148 ++++++++++++++++ board/cloudengines/pogo_v4/pogo_v4.c | 148 ++++++++++++++++ configs/pogo_v4_defconfig | 79 +++++++++ include/configs/pogo_v4.h | 56 ++++++ 10 files changed, 650 insertions(+) create mode 100644 arch/arm/dts/kirkwood-pogoplug-series-4.dts create mode 100644 board/cloudengines/pogo_v4/Kconfig create mode 100644 board/cloudengines/pogo_v4/MAINTAINERS create mode 100644 board/cloudengines/pogo_v4/Makefile create mode 100644 board/cloudengines/pogo_v4/kwbimage.cfg create mode 100644 board/cloudengines/pogo_v4/pogo_v4.c create mode 100644 configs/pogo_v4_defconfig create mode 100644 include/configs/pogo_v4.h
Applied to u-boot-marvell/master Thanks, Stefan
