From: Oleksandr Suvorov <[email protected]> Add supporting new compatible string "u-boot,zynqmp-fpga-ddrauth" to handle loading authenticated images (DDR).
Based on solution by Jorge Ramirez-Ortiz <[email protected]> Signed-off-by: Oleksandr Suvorov <[email protected]> Co-developed-by: Ricardo Salveti <[email protected]> Signed-off-by: Ricardo Salveti <[email protected]> Tested-by: Ricardo Salveti <[email protected]> --- boot/Kconfig | 4 ++-- doc/uImage.FIT/source_file_format.txt | 5 ++++- drivers/fpga/zynqmppl.c | 21 +++++++++++++++++++++ 3 files changed, 27 insertions(+), 3 deletions(-) diff --git a/boot/Kconfig b/boot/Kconfig index b83a4e8400..f7faafb29f 100644 --- a/boot/Kconfig +++ b/boot/Kconfig @@ -209,8 +209,8 @@ config SPL_LOAD_FIT 1. "loadables" images, other than FDTs, which do not have a "load" property will not be loaded. This limitation also applies to FPGA images with the correct "compatible" string. - 2. For FPGA images, only the "compatible" = "u-boot,fpga-legacy" - loading method is supported. + 2. For FPGA images, the supported "compatible" list is in the + doc/uImage.FIT/source_file_format.txt. 3. FDTs are only loaded for images with an "os" property of "u-boot". "linux" images are also supported with Falcon boot mode. diff --git a/doc/uImage.FIT/source_file_format.txt b/doc/uImage.FIT/source_file_format.txt index f93ac6d1c7..461e2af2a8 100644 --- a/doc/uImage.FIT/source_file_format.txt +++ b/doc/uImage.FIT/source_file_format.txt @@ -184,7 +184,10 @@ the '/images' node should have the following layout: Mandatory for types: "firmware", and "kernel". - compatible : compatible method for loading image. Mandatory for types: "fpga", and images that do not specify a load address. - To use the generic fpga loading routine, use "u-boot,fpga-legacy". + Supported compatible methods: + "u-boot,fpga-legacy" - the generic fpga loading routine. + "u-boot,zynqmp-fpga-ddrauth" - signed non-encrypted FPGA bitstream for + Xilinx Zynq UltraScale+ (ZymqMP) device. Optional nodes: - hash-1 : Each hash sub-node represents separate hash or checksum diff --git a/drivers/fpga/zynqmppl.c b/drivers/fpga/zynqmppl.c index c7f9f4ae84..bf6f56e1c4 100644 --- a/drivers/fpga/zynqmppl.c +++ b/drivers/fpga/zynqmppl.c @@ -9,6 +9,7 @@ #include <common.h> #include <compiler.h> #include <cpu_func.h> +#include <fpga.h> #include <log.h> #include <zynqmppl.h> #include <zynqmp_firmware.h> @@ -210,6 +211,26 @@ static int zynqmp_load(xilinx_desc **desc_ptr, const void *buf, size_t bsize, u32 ret_payload[PAYLOAD_ARG_CNT]; bool xilfpga_old = false; xilinx_desc *desc = *desc_ptr; + fpga_desc *fdesc = container_of((void *)desc_ptr, fpga_desc, devdesc); + + if (fdesc && fdesc->compatible && + !strcmp(fdesc->compatible, "u-boot,zynqmp-fpga-ddrauth")) { + if (CONFIG_IS_ENABLED(FPGA_LOAD_SECURE)) { + struct fpga_secure_info info = { 0 }; + + if (!desc->operations->loads) { + printf("%s: Missing load operation\n", __func__); + return FPGA_FAIL; + } + /* DDR authentication */ + info.authflag = 1; + info.encflag = 2; + return desc->operations->loads(desc, buf, bsize, &info); + } else { + printf("No support for %s\n", fdesc->compatible); + return FPGA_FAIL; + } + } if (zynqmp_firmware_version() <= PMUFW_V1_0) { puts("WARN: PMUFW v1.0 or less is detected\n"); -- 2.35.1
