Re: [PATCH u-boot-mvebu v2 2/5] arm: mvebu: a37xx: Enable fuse command on all Armada 3720 boards

[Stefan Roese]

On 2/17/22 19:50, Pali Rohár wrote:

Allow to read OTP bits via U-Boot fuse command on all Armada 3720 boards.

Signed-off-by: Pali Rohár <p...@kernel.org>
Reviewed-by: Marek Behún <marek.be...@nic.cz>

Reviewed-by: Stefan Roese <s...@denx.de>

Thanks,
Stefan

---
  configs/mvebu_db-88f3720_defconfig          | 2 ++
  configs/mvebu_espressobin-88f3720_defconfig | 2 ++
  configs/turris_mox_defconfig                | 2 ++
  configs/uDPU_defconfig                      | 2 ++
  4 files changed, 8 insertions(+)

diff --git a/configs/mvebu_db-88f3720_defconfig 
b/configs/mvebu_db-88f3720_defconfig
index b600217692f1..6cc90fa54266 100644
--- a/configs/mvebu_db-88f3720_defconfig
+++ b/configs/mvebu_db-88f3720_defconfig
@@ -5,6 +5,7 @@ CONFIG_SYS_TEXT_BASE=0x00000000
  CONFIG_SYS_MALLOC_F_LEN=0x2000
  CONFIG_NR_DRAM_BANKS=1
  CONFIG_TARGET_MVEBU_ARMADA_37XX=y
+CONFIG_MVEBU_EFUSE=y
  CONFIG_ENV_SIZE=0x10000
  CONFIG_ENV_OFFSET=0x3f0000
  CONFIG_ENV_SECT_SIZE=0x10000
@@ -24,6 +25,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
  CONFIG_ARCH_EARLY_INIT_R=y
  CONFIG_BOARD_EARLY_INIT_F=y
  # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_FUSE=y
  CONFIG_CMD_GPIO=y
  CONFIG_CMD_I2C=y
  CONFIG_CMD_MMC=y
diff --git a/configs/mvebu_espressobin-88f3720_defconfig 
b/configs/mvebu_espressobin-88f3720_defconfig
index 4b8206a38f1b..f8196eab82e5 100644
--- a/configs/mvebu_espressobin-88f3720_defconfig
+++ b/configs/mvebu_espressobin-88f3720_defconfig
@@ -5,6 +5,7 @@ CONFIG_SYS_TEXT_BASE=0x00000000
  CONFIG_SYS_MALLOC_F_LEN=0x2000
  CONFIG_NR_DRAM_BANKS=1
  CONFIG_TARGET_MVEBU_ARMADA_37XX=y
+CONFIG_MVEBU_EFUSE=y
  CONFIG_ENV_SIZE=0x10000
  CONFIG_ENV_OFFSET=0x3F0000
  CONFIG_ENV_SECT_SIZE=0x10000
@@ -26,6 +27,7 @@ CONFIG_ARCH_EARLY_INIT_R=y
  CONFIG_BOARD_EARLY_INIT_F=y
  CONFIG_BOARD_LATE_INIT=y
  # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_FUSE=y
  CONFIG_CMD_GPIO=y
  CONFIG_CMD_GPT=y
  CONFIG_CMD_I2C=y
diff --git a/configs/turris_mox_defconfig b/configs/turris_mox_defconfig
index 84a0b4c2b20e..25e417c94562 100644
--- a/configs/turris_mox_defconfig
+++ b/configs/turris_mox_defconfig
@@ -5,6 +5,7 @@ CONFIG_SYS_TEXT_BASE=0x00000000
  CONFIG_SYS_MALLOC_F_LEN=0x2000
  CONFIG_NR_DRAM_BANKS=2
  CONFIG_TARGET_TURRIS_MOX=y
+CONFIG_MVEBU_EFUSE=y
  CONFIG_ENV_SIZE=0x10000
  CONFIG_ENV_OFFSET=0x180000
  CONFIG_ENV_SECT_SIZE=0x10000
@@ -31,6 +32,7 @@ CONFIG_MISC_INIT_R=y
  CONFIG_CMD_SHA1SUM=y
  CONFIG_CMD_CLK=y
  # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_FUSE=y
  CONFIG_CMD_GPIO=y
  CONFIG_CMD_GPT=y
  CONFIG_CMD_I2C=y
diff --git a/configs/uDPU_defconfig b/configs/uDPU_defconfig
index b5f2115e6332..7698e080e2a2 100644
--- a/configs/uDPU_defconfig
+++ b/configs/uDPU_defconfig
@@ -4,6 +4,7 @@ CONFIG_ARCH_MVEBU=y
  CONFIG_SYS_TEXT_BASE=0x00000000
  CONFIG_SYS_MALLOC_F_LEN=0x2000
  CONFIG_TARGET_MVEBU_ARMADA_37XX=y
+CONFIG_MVEBU_EFUSE=y
  CONFIG_ENV_SIZE=0x10000
  CONFIG_ENV_OFFSET=0x180000
  CONFIG_ENV_SECT_SIZE=0x10000
@@ -29,6 +30,7 @@ CONFIG_SYS_PROMPT="uDPU>> "
  # CONFIG_CMD_IMI is not set
  # CONFIG_CMD_XIMG is not set
  # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_FUSE=y
  CONFIG_CMD_GPIO=y
  CONFIG_CMD_I2C=y
  CONFIG_CMD_MMC=y

Viele Grüße,
Stefan Roese

--
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de