On Wed, 2 Mar 2022 12:47:56 +0100
Pali Rohár <p...@kernel.org> wrote:
> Move code for disabling sata and pcie DT nodes to own functions, so this
> code can be called from other places in follow up patches.
>
> Signed-off-by: Pali Rohár <p...@kernel.org>
> ---
> board/CZ.NIC/turris_omnia/turris_omnia.c | 96 +++++++++++++-----------
> 1 file changed, 52 insertions(+), 44 deletions(-)
>
> diff --git a/board/CZ.NIC/turris_omnia/turris_omnia.c
> b/board/CZ.NIC/turris_omnia/turris_omnia.c
> index 6a057ea7dd70..57b797db4a8e 100644
> --- a/board/CZ.NIC/turris_omnia/turris_omnia.c
> +++ b/board/CZ.NIC/turris_omnia/turris_omnia.c
> @@ -518,11 +518,54 @@ void spl_board_init(void)
>
> #if IS_ENABLED(CONFIG_OF_BOARD_FIXUP) || IS_ENABLED(CONFIG_OF_BOARD_SETUP)
>
> -static void fixup_serdes_0_nodes(void *blob)
> +static void disable_sata_node(void *blob)
> {
> - bool mode_sata;
> int node;
>
> + fdt_for_each_node_by_compatible(node, blob, -1,
> "marvell,armada-380-ahci") {
> + if (!fdtdec_get_is_enabled(blob, node))
> + continue;
> +
> + if (fdt_status_disabled(blob, node) < 0)
> + printf("Cannot disable SATA DT node!\n");
> + else
> + debug("Disabled SATA DT node\n");
> +
> + break;
> + }
> +}
> +
> +static void disable_pcie_node(void *blob, int port)
> +{
> + int node;
> +
> + fdt_for_each_node_by_compatible(node, blob, -1,
> "marvell,armada-370-pcie") {
> + int port_node;
> +
> + if (!fdtdec_get_is_enabled(blob, node))
> + continue;
> +
> + fdt_for_each_subnode (port_node, blob, node) {
> + if (!fdtdec_get_is_enabled(blob, port_node))
> + continue;
> +
> + if (fdtdec_get_int(blob, port_node,
> "marvell,pcie-port", -1) != port)
> + continue;
> +
> + if (fdt_status_disabled(blob, port_node) < 0)
> + printf("Cannot disable PCIe port %d DT
> node!\n", port);
> + else
> + debug("Disabled PCIe port %d DT node\n", port);
> +
> + return;
> + }
> + }
> +}
> +
> +static void fixup_msata_port_nodes(void *blob)
> +{
> + bool mode_sata;
> +
> /*
> * Determine if SerDes 0 is configured to SATA mode.
> * We do this instead of calling omnia_detect_sata() to avoid another
> @@ -541,47 +584,12 @@ static void fixup_serdes_0_nodes(void *blob)
> return;
> }
>
> - /* If mSATA card is not present, disable SATA DT node */
> if (!mode_sata) {
> - fdt_for_each_node_by_compatible(node, blob, -1,
> - "marvell,armada-380-ahci") {
> - if (!fdtdec_get_is_enabled(blob, node))
> - continue;
> -
> - if (fdt_status_disabled(blob, node) < 0)
> - printf("Cannot disable SATA DT node!\n");
> - else
> - debug("Disabled SATA DT node\n");
> -
> - break;
> - }
> -
> - return;
> - }
> -
> - /* Otherwise disable PCIe port 0 DT node (MiniPCIe / mSATA port) */
> - fdt_for_each_node_by_compatible(node, blob, -1,
> - "marvell,armada-370-pcie") {
> - int port;
> -
> - if (!fdtdec_get_is_enabled(blob, node))
> - continue;
> -
> - fdt_for_each_subnode (port, blob, node) {
> - if (!fdtdec_get_is_enabled(blob, port))
> - continue;
> -
> - if (fdtdec_get_int(blob, port, "marvell,pcie-port",
> - -1) != 0)
> - continue;
> -
> - if (fdt_status_disabled(blob, port) < 0)
> - printf("Cannot disable PCIe port 0 DT node!\n");
> - else
> - debug("Disabled PCIe port 0 DT node\n");
> -
> - return;
> - }
> + /* If mSATA card is not present, disable SATA DT node */
> + disable_sata_node(blob);
> + } else {
> + /* Otherwise disable PCIe port 0 DT node (MiniPCIe / mSATA
> port) */
> + disable_pcie_node(blob, 0);
> }
If I am looking at this correctly, there is only one statement both in
if and in else clause. Can we drop the {} parentheses?
Marek
