Device tree alignment with Linux kernel v5.17-rc1
- ARM: dts: stm32: add pull-up to USART3 and UART7 RX pins
on STM32MP15 DKx boards
- ARM: dts: stm32: clean uart4_idle_pins_a node for stm32mp15
- ARM: dts: stm32: tune the HS USB PHYs on stm32mp15xx-dkx
- ARM: dts: stm32: tune the HS USB PHYs on stm32mp157c-ev1
- ARM: dts: stm32: fix stusb1600 pinctrl used on stm32mp157c-dk
Signed-off-by: Patrick Delaunay <patrick.delau...@foss.st.com>
---
arch/arm/dts/stm32mp15-pinctrl.dtsi | 32 ++++++++++++++---------------
arch/arm/dts/stm32mp157c-ev1.dts | 22 ++++++++++++++++++++
arch/arm/dts/stm32mp15xx-dkx.dtsi | 16 +++++++++++++++
3 files changed, 54 insertions(+), 16 deletions(-)
diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi
b/arch/arm/dts/stm32mp15-pinctrl.dtsi
index d3553e0f01..6161f5906e 100644
--- a/arch/arm/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi
@@ -1718,7 +1718,7 @@
stusb1600_pins_a: stusb1600-0 {
pins {
- pinmux = <STM32_PINMUX('I', 11, ANALOG)>;
+ pinmux = <STM32_PINMUX('I', 11, GPIO)>;
bias-pull-up;
};
};
@@ -1737,20 +1737,20 @@
};
uart4_idle_pins_a: uart4-idle-0 {
- pins1 {
- pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */
- };
- pins2 {
- pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
- bias-disable;
- };
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
};
uart4_sleep_pins_a: uart4-sleep-0 {
- pins {
+ pins {
pinmux = <STM32_PINMUX('G', 11, ANALOG)>, /* UART4_TX */
<STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
- };
+ };
};
uart4_pins_b: uart4-1 {
@@ -1816,7 +1816,7 @@
};
pins2 {
pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
- bias-disable;
+ bias-pull-up;
};
};
@@ -1826,7 +1826,7 @@
};
pins2 {
pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
- bias-disable;
+ bias-pull-up;
};
};
@@ -1971,7 +1971,7 @@
pins2 {
pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
<STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
- bias-disable;
+ bias-pull-up;
};
};
@@ -1988,7 +1988,7 @@
};
pins3 {
pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
- bias-disable;
+ bias-pull-up;
};
};
@@ -2012,7 +2012,7 @@
pins2 {
pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
<STM32_PINMUX('B', 13, AF7)>; /* USART3_CTS_NSS */
- bias-disable;
+ bias-pull-up;
};
};
@@ -2029,7 +2029,7 @@
};
pins3 {
pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
- bias-disable;
+ bias-pull-up;
};
};
diff --git a/arch/arm/dts/stm32mp157c-ev1.dts
b/arch/arm/dts/stm32mp157c-ev1.dts
index 5c5b1ddf7b..e222d2d2cb 100644
--- a/arch/arm/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/dts/stm32mp157c-ev1.dts
@@ -375,3 +375,25 @@
&usbphyc {
status = "okay";
};
+
+&usbphyc_port0 {
+ st,tune-hs-dc-level = <2>;
+ st,enable-fs-rftime-tuning;
+ st,enable-hs-rftime-reduction;
+ st,trim-hs-current = <15>;
+ st,trim-hs-impedance = <1>;
+ st,tune-squelch-level = <3>;
+ st,tune-hs-rx-offset = <2>;
+ st,no-lsfs-sc;
+};
+
+&usbphyc_port1 {
+ st,tune-hs-dc-level = <2>;
+ st,enable-fs-rftime-tuning;
+ st,enable-hs-rftime-reduction;
+ st,trim-hs-current = <15>;
+ st,trim-hs-impedance = <1>;
+ st,tune-squelch-level = <3>;
+ st,tune-hs-rx-offset = <2>;
+ st,no-lsfs-sc;
+};
diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi
b/arch/arm/dts/stm32mp15xx-dkx.dtsi
index 5502eec94b..f8130bf445 100644
--- a/arch/arm/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi
@@ -702,10 +702,26 @@
&usbphyc_port0 {
phy-supply = <&vdd_usb>;
+ st,tune-hs-dc-level = <2>;
+ st,enable-fs-rftime-tuning;
+ st,enable-hs-rftime-reduction;
+ st,trim-hs-current = <15>;
+ st,trim-hs-impedance = <1>;
+ st,tune-squelch-level = <3>;
+ st,tune-hs-rx-offset = <2>;
+ st,no-lsfs-sc;
};
&usbphyc_port1 {
phy-supply = <&vdd_usb>;
+ st,tune-hs-dc-level = <2>;
+ st,enable-fs-rftime-tuning;
+ st,enable-hs-rftime-reduction;
+ st,trim-hs-current = <15>;
+ st,trim-hs-impedance = <1>;
+ st,tune-squelch-level = <3>;
+ st,tune-hs-rx-offset = <2>;
+ st,no-lsfs-sc;
};
&vrefbuf {
