Hi, first thank you for the fast answer I have tried it but unfortunately still the same error. The output of mlocate confirms that arm-linux-gnueabihf- is present in the path
/usr/bin/arm-linux-gnueabihf-addr2line /usr/bin/arm-linux-gnueabihf-ar /usr/bin/arm-linux-gnueabihf-as /usr/bin/arm-linux-gnueabihf-c++filt /usr/bin/arm-linux-gnueabihf-cpp /usr/bin/arm-linux-gnueabihf-cpp-9 /usr/bin/arm-linux-gnueabihf-dwp /usr/bin/arm-linux-gnueabihf-elfedit /usr/bin/arm-linux-gnueabihf-g++ /usr/bin/arm-linux-gnueabihf-g++-9 /usr/bin/arm-linux-gnueabihf-gcc /usr/bin/arm-linux-gnueabihf-gcc-9 /usr/bin/arm-linux-gnueabihf-gcc-ar /usr/bin/arm-linux-gnueabihf-gcc-ar-9 /usr/bin/arm-linux-gnueabihf-gcc-nm /usr/bin/arm-linux-gnueabihf-gcc-nm-9 /usr/bin/arm-linux-gnueabihf-gcc-ranlib /usr/bin/arm-linux-gnueabihf-gcc-ranlib-9 /usr/bin/arm-linux-gnueabihf-gcov /usr/bin/arm-linux-gnueabihf-gcov-9 /usr/bin/arm-linux-gnueabihf-gcov-dump /usr/bin/arm-linux-gnueabihf-gcov-dump-9 /usr/bin/arm-linux-gnueabihf-gcov-tool /usr/bin/arm-linux-gnueabihf-gcov-tool-9 /usr/bin/arm-linux-gnueabihf-gprof /usr/bin/arm-linux-gnueabihf-ld /usr/bin/arm-linux-gnueabihf-ld.bfd /usr/bin/arm-linux-gnueabihf-ld.gold /usr/bin/arm-linux-gnueabihf-nm /usr/bin/arm-linux-gnueabihf-objcopy /usr/bin/arm-linux-gnueabihf-objdump /usr/bin/arm-linux-gnueabihf-ranlib /usr/bin/arm-linux-gnueabihf-readelf /usr/bin/arm-linux-gnueabihf-size /usr/bin/arm-linux-gnueabihf-strings /usr/bin/arm-linux-gnueabihf-strip ________________________________ Von: Fabio Estevam <[email protected]> Gesendet: Dienstag, 15. März 2022 12:53 An: Sarmad Ahmad <[email protected]> Cc: [email protected] <[email protected]> Betreff: Re: Problem to build u-boot Hi Sarmad, On Tue, Mar 15, 2022 at 8:43 AM Sarmad Ahmad <[email protected]> wrote: > > Hi, > > i am stundent and try to build u-boot for board cora-z7-10 > > I build u-boot as follows > > > > export ARCH=arm > > export CROSS_COMPILE=gcc-7-arm-linux-gnueabihf- Try: export ARCH=arm export CROSS_COMPILE=/usr/bin/arm-linux-gnueabihf- > > export DEVICE_TREE="zynq-zc702" No need for exporting this. Regards, Fabio Estevam
