i.MX8MM/MN/MP/MQ - added support for JR driver model. sec is initialized based on job ring information processed from device tree.
Signed-off-by: Gaurav Jain <[email protected]> Reviewed-by: Ye Li <[email protected]> --- arch/arm/Kconfig | 2 +- arch/arm/mach-imx/imx8m/Kconfig | 13 +++++++++++++ arch/arm/mach-imx/imx8m/soc.c | 11 ++++++++++- board/freescale/imx8mm_evk/spl.c | 10 +++++++++- board/freescale/imx8mn_evk/spl.c | 9 +++++++-- board/freescale/imx8mp_evk/spl.c | 14 ++++++++++++-- board/freescale/imx8mq_evk/spl.c | 8 ++++++-- 7 files changed, 58 insertions(+), 9 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4567c183fb..f207e709d4 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -817,7 +817,7 @@ config ARCH_IMX8M select ARM64 select GPIO_EXTRA_HEADER select MACH_IMX - select SYS_FSL_HAS_SEC if IMX_HAB + select SYS_FSL_HAS_SEC select SYS_FSL_SEC_COMPAT_4 select SYS_FSL_SEC_LE select SYS_I2C_MXC diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig index fae7049995..f564e0dd6f 100644 --- a/arch/arm/mach-imx/imx8m/Kconfig +++ b/arch/arm/mach-imx/imx8m/Kconfig @@ -39,6 +39,9 @@ config TARGET_IMX8MQ_EVK select BINMAN select IMX8MQ select IMX8M_LPDDR4 + select FSL_CAAM + select ARCH_MISC_INIT + select SPL_CRYPTO if SPL config TARGET_IMX8MQ_PHANBELL bool "imx8mq_phanbell" @@ -52,6 +55,9 @@ config TARGET_IMX8MM_EVK select IMX8MM select SUPPORT_SPL select IMX8M_LPDDR4 + select FSL_CAAM + select ARCH_MISC_INIT + select SPL_CRYPTO if SPL config TARGET_IMX8MM_ICORE_MX8MM bool "Engicam i.Core MX8M Mini SOM" @@ -91,6 +97,8 @@ config TARGET_IMX8MN_EVK select IMX8MN select SUPPORT_SPL select IMX8M_LPDDR4 + select FSL_CAAM + select SPL_CRYPTO if SPL config TARGET_IMX8MN_DDR4_EVK bool "imx8mn DDR4 EVK board" @@ -98,6 +106,8 @@ config TARGET_IMX8MN_DDR4_EVK select IMX8MN select SUPPORT_SPL select IMX8M_DDR4 + select FSL_CAAM + select SPL_CRYPTO if SPL config TARGET_IMX8MN_VENICE bool "Support Gateworks Venice iMX8M Nano module" @@ -112,6 +122,9 @@ config TARGET_IMX8MP_EVK select IMX8MP select SUPPORT_SPL select IMX8M_LPDDR4 + select FSL_CAAM + select ARCH_MISC_INIT + select SPL_CRYPTO if SPL config TARGET_PICO_IMX8MQ bool "Support Technexion Pico iMX8MQ" diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c index 1a5a391443..17efe37447 100644 --- a/arch/arm/mach-imx/imx8m/soc.c +++ b/arch/arm/mach-imx/imx8m/soc.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Copyright 2017-2019 NXP + * Copyright 2017-2019, 2021 NXP * * Peng Fan <[email protected]> */ @@ -20,6 +20,7 @@ #include <asm/ptrace.h> #include <asm/armv8/mmu.h> #include <dm/uclass.h> +#include <dm/device.h> #include <efi_loader.h> #include <env.h> #include <env_internal.h> @@ -1210,6 +1211,14 @@ static void acquire_buildinfo(void) int arch_misc_init(void) { + if (IS_ENABLED(CONFIG_FSL_CAAM)) { + struct udevice *dev; + int ret; + + ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(caam_jr), &dev); + if (ret) + printf("Failed to initialize %s: %d\n", dev->name, ret); + } acquire_buildinfo(); return 0; diff --git a/board/freescale/imx8mm_evk/spl.c b/board/freescale/imx8mm_evk/spl.c index 4ef7f6f180..cf4882cd10 100644 --- a/board/freescale/imx8mm_evk/spl.c +++ b/board/freescale/imx8mm_evk/spl.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Copyright 2019 NXP + * Copyright 2019, 2021 NXP */ #include <common.h> @@ -51,6 +51,14 @@ static void spl_dram_init(void) void spl_board_init(void) { + if (IS_ENABLED(CONFIG_FSL_CAAM)) { + struct udevice *dev; + int ret; + + ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(caam_jr), &dev); + if (ret) + printf("Failed to initialize %s: %d\n", dev->name, ret); + } puts("Normal Boot\n"); } diff --git a/board/freescale/imx8mn_evk/spl.c b/board/freescale/imx8mn_evk/spl.c index 03f2a56e80..dfa81a0d65 100644 --- a/board/freescale/imx8mn_evk/spl.c +++ b/board/freescale/imx8mn_evk/spl.c @@ -1,7 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* - * Copyright 2018-2019 NXP + * Copyright 2018-2019, 2021 NXP * - * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> @@ -49,6 +49,11 @@ void spl_board_init(void) struct udevice *dev; int ret; + if (IS_ENABLED(CONFIG_FSL_CAAM)) { + ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(caam_jr), &dev); + if (ret) + printf("Failed to initialize %s: %d\n", dev->name, ret); + } puts("Normal Boot\n"); ret = uclass_get_device_by_name(UCLASS_CLK, diff --git a/board/freescale/imx8mp_evk/spl.c b/board/freescale/imx8mp_evk/spl.c index eca42c756e..503a752ae9 100644 --- a/board/freescale/imx8mp_evk/spl.c +++ b/board/freescale/imx8mp_evk/spl.c @@ -1,7 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* - * Copyright 2018-2019 NXP + * Copyright 2018-2019, 2021 NXP * - * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> @@ -20,6 +20,8 @@ #include <asm/arch/ddr.h> #include <power/pmic.h> #include <power/pca9450.h> +#include <dm/uclass.h> +#include <dm/device.h> DECLARE_GLOBAL_DATA_PTR; @@ -35,6 +37,14 @@ void spl_dram_init(void) void spl_board_init(void) { + if (IS_ENABLED(CONFIG_FSL_CAAM)) { + struct udevice *dev; + int ret; + + ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(caam_jr), &dev); + if (ret) + printf("Failed to initialize %s: %d\n", dev->name, ret); + } /* * Set GIC clock to 500Mhz for OD VDD_SOC. Kernel driver does * not allow to change it. Should set the clock after PMIC diff --git a/board/freescale/imx8mq_evk/spl.c b/board/freescale/imx8mq_evk/spl.c index 67d069b2b0..b28056bb48 100644 --- a/board/freescale/imx8mq_evk/spl.c +++ b/board/freescale/imx8mq_evk/spl.c @@ -1,8 +1,7 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Copyright 2018 NXP + * Copyright 2018, 2021 NXP * - * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> @@ -22,6 +21,7 @@ #include <asm/mach-imx/gpio.h> #include <asm/mach-imx/mxc_i2c.h> #include <fsl_esdhc_imx.h> +#include <fsl_sec.h> #include <mmc.h> #include <linux/delay.h> #include <power/pmic.h> @@ -199,6 +199,10 @@ int power_init_board(void) void spl_board_init(void) { + if (IS_ENABLED(CONFIG_FSL_CAAM)) { + if (sec_init()) + printf("\nsec_init failed!\n"); + } puts("Normal Boot\n"); } -- 2.17.1
