From: Fabio Estevam <[email protected]> When adding new features to imx8m boards, such as DM clock support, the malloc area can be exhausted.
To avoid such issue, provide a reasonable default for the SYS_MALLOC_F_LEN size. Quoting Tom Rini: "This seems to be an area where everyone is either: - Kicking the value up a bit for themselves - Having hard to figure out problems booting the platform because it's too small a value until they see someone else picked a larger value. So lets raise these a bit and get some acks, please." Suggested-by: Heinrich Schuchardt <[email protected]> Signed-off-by: Fabio Estevam <[email protected]> Tested-by: Adam Ford <[email protected]> #imx8mm-beacon, imx8mn-beacon Tested-by: Heiko Thiery <[email protected]> --- Changes since v2: - Also bump the default for imx8/layerscape - Tom - Expand the Cc list - Tom Kconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Kconfig b/Kconfig index 9dd9ec7f6dfb..8b346894e581 100644 --- a/Kconfig +++ b/Kconfig @@ -232,10 +232,10 @@ config SYS_MALLOC_F_LEN depends on SYS_MALLOC_F default 0x1000 if AM33XX default 0x4000 if SANDBOX - default 0x2000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_MX7 || \ - ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5 || \ - ARCH_LS1012A || ARCH_LS1021A || ARCH_LS1043A || \ - ARCH_LS1046A || ARCH_QEMU || ARCH_SUNXI || ARCH_OWL) + default 0x2000 if (ARCH_MX7 || ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5 || \ + ARCH_QEMU || ARCH_SUNXI || ARCH_OWL) + default 0x10000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_LS1012A || \ + ARCH_LS1021A || ARCH_LS1043A || ARCH_LS1046A) default 0x400 help Before relocation, memory is very limited on many platforms. Still, -- 2.25.1
