This patch does following changes:
* Change the type (u8 -> int) for omap3_evm_version.
* Introduce an 'undefined' board revision for init
value.
* Use of #define instead of magic numbers
Signed-off-by: Sanjeev Premi <pr...@ti.com>
---
board/ti/evm/evm.c | 39 +++++++++++++++++++++++----------------
board/ti/evm/evm.h | 17 +++++++----------
2 files changed, 30 insertions(+), 26 deletions(-)
diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c
index 09d14f7..8d9ce73 100644
--- a/board/ti/evm/evm.c
+++ b/board/ti/evm/evm.c
@@ -37,36 +37,43 @@
#include <asm/mach-types.h>
#include "evm.h"
-static u8 omap3_evm_version;
+static int omap3_evm_version = OMAP3EVM_BOARD_UNDEF;
-u8 get_omap3_evm_rev(void)
+int get_omap3_evm_rev(void)
{
return omap3_evm_version;
}
+/**
+ * The board revision can be ascertained only by identifying the
+ * Ethernet chipset used on the board.
+ *
+ * The revision can be read from ID_REV register on the PHY.
+ */
static void omap3_evm_get_revision(void)
{
-#if defined(CONFIG_CMD_NET)
- /*
- * Board revision can be ascertained only by identifying
- * the Ethernet chipset.
- */
- unsigned int smsc_id;
+#define CONFIG_SMC911X_ID_REV (CONFIG_SMC911X_BASE + 0x50)
- /* Ethernet PHY ID is stored at ID_REV register */
- smsc_id = readl(CONFIG_SMC911X_BASE + 0x50) & 0xFFFF0000;
- printf("Read back SMSC id 0x%x\n", smsc_id);
+#define SMSC_ID_9115 0x01150000 /* SMSC9115 chipset */
+#define SMSC_ID_9220 0x92200000 /* SMSC9220 chipset */
+
+#if defined(CONFIG_CMD_NET)
+ unsigned int smsc_id = readl(CONFIG_SMC911X_ID_REV) & 0xFFFF0000;
switch (smsc_id) {
- /* SMSC9115 chipset */
- case 0x01150000:
+ case SMSC_ID_9115:
omap3_evm_version = OMAP3EVM_BOARD_GEN_1;
break;
- /* SMSC 9220 chipset */
- case 0x92200000:
+ case SMSC_ID_9220:
+ omap3_evm_version = OMAP3EVM_BOARD_GEN_2;
+ break;
default:
+ printf ("Unknown board revision.");
+ /*
+ * Assume the latest revision
+ */
omap3_evm_version = OMAP3EVM_BOARD_GEN_2;
- }
+ }
#else
#if defined(CONFIG_STATIC_BOARD_REV)
/*
diff --git a/board/ti/evm/evm.h b/board/ti/evm/evm.h
index a76deb8..de96504 100644
--- a/board/ti/evm/evm.h
+++ b/board/ti/evm/evm.h
@@ -34,18 +34,15 @@ const omap3_sysinfo sysinfo = {
};
/*
- * OMAP35x EVM revision
- * Run time detection of EVM revision is done by reading Ethernet
- * PHY ID -
- * GEN_1 = 0x01150000
- * GEN_2 = 0x92200000
+ * OMAP35x EVM Revision.
+ * The revision can be detected only based on Ethernet PHY ID.
*/
-enum {
- OMAP3EVM_BOARD_GEN_1 = 0, /* EVM Rev between A - D */
- OMAP3EVM_BOARD_GEN_2, /* EVM Rev >= Rev E */
-};
+#define OMAP3EVM_BOARD_UNDEF -1 /* EVM revision not detected */
+
+#define OMAP3EVM_BOARD_GEN_1 1 /* EVM Rev between A - D */
+#define OMAP3EVM_BOARD_GEN_2 2 /* EVM Rev >= Rev E */
-u8 get_omap3_evm_rev(void);
+int get_omap3_evm_rev(void);
#if defined(CONFIG_CMD_NET)
static void setup_net_chip(void);
--
1.7.2.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
