This is for boards that use the SDRAM mode on the LBC but don't require any additional setup.
I'm merging all the initdram() calls into a single function for 85xx, and have to be able to distinguish between boards that require an sdram_init() function, and those that do not. We could have defined an empty sdram_init() but I hate doing that. Signed-off-by: Becky Bruce <bec...@kernel.crashing.org> --- include/configs/sbc8560.h | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h index 101c5d9..65d8eba 100644 --- a/include/configs/sbc8560.h +++ b/include/configs/sbc8560.h @@ -136,6 +136,9 @@ #undef CONFIG_CLOCKS_IN_MHZ +/* No sdram_init() required - some boards require additional setup */ +#define CONFIG_SYS_LBC_NO_SDRAM_INIT + #if defined(CONFIG_RAM_AS_FLASH) #define CONFIG_SYS_LBC_SDRAM_BASE 0xfc000000 /* Localbus SDRAM */ #define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH 8M */ -- 1.6.0.6 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot