> From: Philippe Schenker <[email protected]> > Now that it is possible to use regulator-fixed-clock make use > of it. This makes U-Boot detect the PHY on first cold-boot. > This commit also adjusts the code in setup_fec and follows > how it is done in mx6ullevk.c > This commit also slows down the boot-process by about 150ms > as it now waits for the regulator-fixed-clock voltage that > drives the PHY to go up. > If you rely on very fast boot-speeds and don't need ethernet > for your boot-process you can safely revert the changes on > imx6ull-colibri.dtsi > Signed-off-by: Philippe Schenker <[email protected]> > Signed-off-by: Marcel Ziswiler <[email protected]> Applied to u-boot-imx, master, thanks !
Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
