Most platform glue drivers need DM USB, if one of these driver is enabled along with SPL without DM the build break. As the SPL might still want to use the core DWC3 put the DM glue drivers under ifdef CONFIG_$(SPL_)DM_USB.
Signed-off-by: Alban Bedel <[email protected]> --- drivers/usb/dwc3/Makefile | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile index 0dd1ba87cd94..34355048b7af 100644 --- a/drivers/usb/dwc3/Makefile +++ b/drivers/usb/dwc3/Makefile @@ -7,10 +7,13 @@ dwc3-y := core.o obj-$(CONFIG_USB_DWC3_GADGET) += gadget.o ep0.o obj-$(CONFIG_USB_DWC3_OMAP) += dwc3-omap.o +obj-$(CONFIG_USB_DWC3_UNIPHIER) += dwc3-uniphier.o +obj-$(CONFIG_USB_DWC3_PHY_OMAP) += ti_usb_phy.o +obj-$(CONFIG_USB_DWC3_PHY_SAMSUNG) += samsung_usb_phy.o + +ifdef CONFIG_$(SPL_)DM_USB obj-$(CONFIG_USB_DWC3_MESON_G12A) += dwc3-meson-g12a.o obj-$(CONFIG_USB_DWC3_MESON_GXL) += dwc3-meson-gxl.o obj-$(CONFIG_USB_DWC3_GENERIC) += dwc3-generic.o -obj-$(CONFIG_USB_DWC3_UNIPHIER) += dwc3-uniphier.o obj-$(CONFIG_USB_DWC3_LAYERSCAPE) += dwc3-layerscape.o -obj-$(CONFIG_USB_DWC3_PHY_OMAP) += ti_usb_phy.o -obj-$(CONFIG_USB_DWC3_PHY_SAMSUNG) += samsung_usb_phy.o +endif -- 2.32.0
smime.p7s
Description: S/MIME cryptographic signature
