On 4/21/22 19:24, Fabio Estevam wrote:
From: Fabio Estevam <feste...@denx.de>
When trying to boot via USB on i.MX8MN it is necessary to specify
the U-Boot environment location, otherwise the boot process simply
hangs.
Specify the environment location when booting from USB.
Tested on a imx8mn-evk.
Suggested-by: Michael Nazzareno Trimarchi <mich...@amarulasolutions.com>
Signed-off-by: Fabio Estevam <feste...@denx.de>
---
Changes since v1:
- Handle the env selection for the USB_BOOT case (Michael).
arch/arm/mach-imx/imx8m/soc.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c
index 7059d87e336b..34f8475bca46 100644
--- a/arch/arm/mach-imx/imx8m/soc.c
+++ b/arch/arm/mach-imx/imx8m/soc.c
@@ -1536,6 +1536,14 @@ enum env_location arch_env_get_location(enum
env_operation op, int prio)
return ENVL_UNKNOWN;
switch (dev) {
+ case USB_BOOT:
+ if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH))
+ return ENVL_SPI_FLASH;
+ if (IS_ENABLED(CONFIG_ENV_IS_IN_NAND))
+ return ENVL_NAND;
+ if (IS_ENABLED(CONFIG_ENV_IS_IN_MMC))
+ return ENVL_MMC;
+ return ENVL_NOWHERE;
Shouldn't this last entry also be
if (IS_ENABLED(CONFIG_ENV_IS_NOWHERE))
return ENVL_NOWHERE;
?
