On Thu, May 05, 2022 at 10:51:39AM -0400, Sean Anderson wrote: > Hi Tom, > > On 5/4/22 8:06 PM, Tom Rini wrote: > > On Fri, Apr 22, 2022 at 02:27:41PM -0400, Sean Anderson wrote: > > > >> This converts the fat loader to use spl_load. > >> > >> Signed-off-by: Sean Anderson <[email protected]> > >> Reviewed-by: Stefan Roese <[email protected]> > > > > On am335x_evm_defconfig, and booting from a FAT SD card I see: > > Trying to boot from MMC1 > > spl_load_image_fat: error reading image u-boot.img, err - 0 > > SPL: failed to boot from all boot devices > > ### ERROR ### Please RESET the board ### > > Looks like spl_load_image_fat was expecting bytes read and > not an errno (and so turned your success into a failure). Will fix.
OK. > > Note that while not _this_ patch (but likely the one for raw) breaks > > booting from my mx6cuboxi via SD card with: > > Trying to boot from MMC1 > > [hang] > > > > Hm, if there's a problem you should at least see > "mmc_load_image_raw_sector: mmc block read error\n" > > Could you enable DEBUG in common/spl/spl.c and common/spl/spl_mmc.c? U-Boot SPL 2022.07-rc1-00267-g064334e21dde-dirty (May 05 2022 - 11:33:38 -0400) >>SPL: board_init_r() spl_init Trying to boot from MMC1 spl: mmc boot mode: raw hdr read sector 8a, count=1 -- Tom
signature.asc
Description: PGP signature
