On Wed, May 4, 2022 at 5:53 AM Marek Vasut <ma...@denx.de> wrote: > > On 5/4/22 14:26, Peng Fan wrote: > > Hi Marek, > > Hi, > > > Since you did some work on i.MX8MP USB, may I know the status? > > Does host/device mode both supported in upstream? > > I only have HOST option available, so for me this is only HOST. > > I did not test GADGET or OTG . >
Marek, Do you still have IMX8MP USB host working on top of v2022.07-rc2, master, or imx-master? It worked for me previously at some point applying your dwc3 glue series [1] from a repo you pointed me to that I can no longer find but now I see an issue where device_probe fails: u-boot=> usb start starting USB... Bus usb@38100000: probe failed, error -61 Bus usb@38200000: probe failed, error -61 No working controllers found The failure is that dwc3_glue_probe fails to find 'usb3-phy' due to that being in the phy-names node of usb@38100000 and not its parent usb@32f10100 Am I missing a patch perhaps to dwc3_glue_probe in dwc3-generic.c? Tim [1] https://patchwork.ozlabs.org/project/uboot/list/?series=293112