Hi, On Wed, Jun 08, 2022 at 04:14:51PM +0200, Michael Nazzareno Trimarchi wrote: > Hi > > On Wed, Jun 8, 2022 at 4:13 PM Fabio Estevam <[email protected]> wrote: > > > > Hi, > > > > On top of tree U-Boot, when CONFIG_IMX_HAB=y is selected in > > imx8mm_evk_defconfig, the following error messages are seen: > > > > U-Boot SPL 2022.07-rc3-00097-g26aa5e5c3fbc-dirty (Jun 08 2022 - 10:59:56 > > -0300) > > SEC0: RNG instantiated > > Normal Boot > > WDT: Started watchdog@30280000 with servicing (60s timeout) > > Trying to boot from MMC1 > > hab fuse not enabled > > > > Authenticate image from DDR location 0x401fcdc0... > > bad magic magic=0x0 length=0x00 version=0x0 > > bad length magic=0x0 length=0x00 version=0x0 > > bad version magic=0x0 length=0x00 version=0x0 > > Error: Invalid IVT structure > > You need to have a sign image
Agree Maybe this page can help you Fabio https://boundarydevices.com/high-assurance-boot-hab-i-mx8m-edition/ Regards, Tommaso > > Michael > > > NOTICE: BL31: v2.4(release):lf-5.15.5-1.0.0-10-gcb51a0faa4b6 > > NOTICE: BL31: Built : 10:50:11, Jun 8 2022 > > > > The boot proceeds normally, despite the error messages above. > > > > Does anyone know how we could fix these errors? > > > > Thanks, > > > > Fabio Estevam > > > > -- > Michael Nazzareno Trimarchi > Co-Founder & Chief Executive Officer > M. +39 347 913 2170 > [email protected] > __________________________________ > > Amarula Solutions BV > Joop Geesinkweg 125, 1114 AB, Amsterdam, NL > T. +31 (0)85 111 9172 > [email protected] > www.amarulasolutions.com -- Tommaso Merciai Embedded Linux Engineer [email protected] __________________________________ Amarula Solutions SRL Via Le Canevare 30, 31100 Treviso, Veneto, IT T. +39 042 243 5310 [email protected] www.amarulasolutions.com
