With the move to use DM_CLK the boards uart stops working. The used
properties are not supported by the imx8mq clock driver. Thus
the correct baudrate cannot be selected. Remove this properties here and
the board can start with working uart. Keep it in the main dts because
linux handles these porperties fine.
Signed-off-by: Heiko Thiery <heiko.thi...@gmail.com>
---
.../arm/dts/imx8mq-kontron-pitx-imx8m-u-boot.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/dts/imx8mq-kontron-pitx-imx8m-u-boot.dtsi
b/arch/arm/dts/imx8mq-kontron-pitx-imx8m-u-boot.dtsi
index 6f9c81462e..d361f3f559 100644
--- a/arch/arm/dts/imx8mq-kontron-pitx-imx8m-u-boot.dtsi
+++ b/arch/arm/dts/imx8mq-kontron-pitx-imx8m-u-boot.dtsi
@@ -10,3 +10,18 @@
sd-uhs-sdr104;
sd-uhs-ddr50;
};
+
+&uart1 {
+ /delete-property/ assigned-clocks;
+ /delete-property/ assigned-clock-parents;
+};
+
+&uart2 {
+ /delete-property/ assigned-clocks;
+ /delete-property/ assigned-clock-parents;
+};
+
+&uart3 {
+ /delete-property/ assigned-clocks;
+ /delete-property/ assigned-clock-parents;
+};
--
2.30.2
