在 2022/6/14 3:49, Heiko Thiery 写道:
Am Mo., 13. Juni 2022 um 21:43 Uhr schrieb Heiko Thiery
<heiko.thi...@gmail.com>:
Hi,
Am Mo., 13. Juni 2022 um 21:28 Uhr schrieb Fabio Estevam <feste...@gmail.com>:
Hi Heiko,
On Mon, Jun 13, 2022 at 4:16 PM Heiko Thiery <heiko.thi...@gmail.com> wrote:
Can anyone confirm the behavior?
imx8mn ddr4 evk prints the SPL part just fine.
Take a look at arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi .
It passes:
&uart2 {
u-boot,dm-spl;
};
&pinctrl_uart2 {
u-boot,dm-spl;
};
Are you doing the same for the imx8mn ddr3 u-boot dtsi?
Indeed these are missing. Now I see the whole output from U-Boot but
the output from SPL is still missing. When enabloing SPL_DM_SERIAL the
board does not start.
I now did include the whole "imx8mn-ddr4-evk-u-boot.dtsi" like it is
done in "imx8mn-evk-u-boot.dtsi". Then it works.
make sure preload_console_init is called after spl_early_init or
spl_init, not before.
Regards,
Peng.
--
Heiko