In some usages of inline assembly, hard-coded registers were specified when a
scratch register should have been used instead.

Signed-off-by: Timur Tabi <[email protected]>
---

I can't test the kgdb changes, but the rest appears to be okay.

 arch/powerpc/lib/kgdb.c |   25 +++++++++++++++----------
 arch/powerpc/lib/time.c |    5 ++++-
 2 files changed, 19 insertions(+), 11 deletions(-)

diff --git a/arch/powerpc/lib/kgdb.c b/arch/powerpc/lib/kgdb.c
index 1ec6818..19a56db 100644
--- a/arch/powerpc/lib/kgdb.c
+++ b/arch/powerpc/lib/kgdb.c
@@ -12,11 +12,13 @@ void breakinst(void);
 int
 kgdb_setjmp(long *buf)
 {
-       asm ("mflr 0; stw 0,0(%0);"
-            "stw 1,4(%0); stw 2,8(%0);"
-            "mfcr 0; stw 0,12(%0);"
-            "stmw 13,16(%0)"
-            : : "r" (buf));
+       unsigned long temp;
+
+       asm volatile("mflr %0; stw %0,0(%1);"
+            "stw %%r1,4(%1); stw %%r2,8(%1);"
+            "mfcr %0; stw %0,12(%1);"
+            "stmw %%r13,16(%1)"
+            : "=&r"(temp) : "r" (buf));
        /* XXX should save fp regs as well */
        return 0;
 }
@@ -24,13 +26,16 @@ kgdb_setjmp(long *buf)
 void
 kgdb_longjmp(long *buf, int val)
 {
+       unsigned long temp;
+
        if (val == 0)
                val = 1;
-       asm ("lmw 13,16(%0);"
-            "lwz 0,12(%0); mtcrf 0x38,0;"
-            "lwz 0,0(%0); lwz 1,4(%0); lwz 2,8(%0);"
-            "mtlr 0; mr 3,%1"
-            : : "r" (buf), "r" (val));
+
+       asm volatile("lmw %%r13,16(%1);"
+            "lwz %0,12(%1); mtcrf 0x38,%0;"
+            "lwz %0,0(%1); lwz %%r1,4(%1); lwz %%r2,8(%1);"
+            "mtlr %0; mr %%r3,%2"
+            : "=&r"(temp) : "r" (buf), "r" (val));
 }
 
 static inline unsigned long
diff --git a/arch/powerpc/lib/time.c b/arch/powerpc/lib/time.c
index 2909961..34633c3 100644
--- a/arch/powerpc/lib/time.c
+++ b/arch/powerpc/lib/time.c
@@ -78,6 +78,8 @@ unsigned long ticks2usec(unsigned long ticks)
 
 int init_timebase (void)
 {
+       unsigned long temp;
+
 #if defined(CONFIG_5xx) || defined(CONFIG_8xx)
        volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
@@ -86,7 +88,8 @@ int init_timebase (void)
 #endif
 
        /* reset */
-       asm ("li 3,0 ; mttbu 3 ; mttbl 3 ;");
+       asm volatile("li %0,0 ; mttbu %0 ; mttbl %0;"
+            : "=&r"(temp) );
 
 #if defined(CONFIG_5xx) || defined(CONFIG_8xx)
        /* enable */
-- 
1.7.2.3


_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to