To reduce code duplication, let the stm32 based DH boards use the common
code for setting up their MAC addresses.
Signed-off-by: Philip Oberfichtner <p...@denx.de>
Tested-by: Marek Vasut <ma...@denx.de>
Reviewed-by: Marek Vasut <ma...@denx.de>
---
Changes in v3:
- Reviewed by Marek
Changes in v2:
- convert to livetree (rebase on commit 5a605b7c86152)
- Tested-by Marek
board/dhelectronics/dh_stm32mp1/board.c | 102 +++++++++++-------------
1 file changed, 45 insertions(+), 57 deletions(-)
diff --git a/board/dhelectronics/dh_stm32mp1/board.c
b/board/dhelectronics/dh_stm32mp1/board.c
index 7a4c08cb7f..ab354e3e33 100644
--- a/board/dhelectronics/dh_stm32mp1/board.c
+++ b/board/dhelectronics/dh_stm32mp1/board.c
@@ -42,6 +42,7 @@
#include <usb/dwc2_udc.h>
#include <watchdog.h>
#include <dm/ofnode.h>
+#include "../common/dh_common.h"
#include "../../st/common/stpmic1.h"
/* SYSCFG registers */
@@ -84,36 +85,17 @@
#define KS_CIDER 0xC0
#define CIDER_ID 0x8870
-int setup_mac_address(void)
+static bool dh_stm32_mac_is_in_ks8851(void)
{
- unsigned char enetaddr[6];
- bool skip_eth0 = false;
- bool skip_eth1 = false;
- struct udevice *dev;
- int ret;
ofnode node;
-
- ret = eth_env_get_enetaddr("ethaddr", enetaddr);
- if (ret) /* ethaddr is already set */
- skip_eth0 = true;
+ u32 reg, cider, ccr;
node = ofnode_path("ethernet1");
- if (!ofnode_valid(node)) {
- /* ethernet1 is not present in the system */
- skip_eth1 = true;
- goto out_set_ethaddr;
- }
+ if (!ofnode_valid(node))
+ return false;
- ret = eth_env_get_enetaddr("eth1addr", enetaddr);
- if (ret) {
- /* eth1addr is already set */
- skip_eth1 = true;
- goto out_set_ethaddr;
- }
-
- ret = ofnode_device_is_compatible(node, "micrel,ks8851-mll");
- if (ret)
- goto out_set_ethaddr;
+ if (ofnode_device_is_compatible(node, "micrel,ks8851-mll"))
+ return false;
/*
* KS8851 with EEPROM may use custom MAC from EEPROM, read
@@ -121,56 +103,62 @@ int setup_mac_address(void)
* is present. If EEPROM is present, it must contain valid
* MAC address.
*/
- u32 reg, cider, ccr;
reg = ofnode_get_addr(node);
if (!reg)
- goto out_set_ethaddr;
+ return false;
writew(KS_BE0 | KS_BE1 | KS_CIDER, reg + 2);
cider = readw(reg);
- if ((cider & 0xfff0) != CIDER_ID) {
- skip_eth1 = true;
- goto out_set_ethaddr;
- }
+ if ((cider & 0xfff0) != CIDER_ID)
+ return true;
writew(KS_BE0 | KS_BE1 | KS_CCR, reg + 2);
ccr = readw(reg);
- if (ccr & KS_CCR_EEPROM) {
- skip_eth1 = true;
- goto out_set_ethaddr;
- }
+ if (ccr & KS_CCR_EEPROM)
+ return true;
+
+ return false;
+}
-out_set_ethaddr:
- if (skip_eth0 && skip_eth1)
+static int dh_stm32_setup_ethaddr(void)
+{
+ unsigned char enetaddr[6];
+
+ if (dh_mac_is_in_env("ethaddr"))
return 0;
- node = ofnode_path("eeprom0");
- if (!ofnode_valid(node)) {
- printf("%s: No eeprom0 path offset\n", __func__);
- return -ENOENT;
- }
+ if (!dh_get_mac_from_eeprom(enetaddr, "eeprom0"))
+ return eth_env_set_enetaddr("ethaddr", enetaddr);
- ret = uclass_get_device_by_ofnode(UCLASS_I2C_EEPROM, node, &dev);
- if (ret) {
- printf("Cannot find EEPROM!\n");
- return ret;
- }
+ return -ENXIO;
+}
- ret = i2c_eeprom_read(dev, 0xfa, enetaddr, 0x6);
- if (ret) {
- printf("Error reading configuration EEPROM!\n");
- return ret;
- }
+static int dh_stm32_setup_eth1addr(void)
+{
+ unsigned char enetaddr[6];
- if (is_valid_ethaddr(enetaddr)) {
- if (!skip_eth0)
- eth_env_set_enetaddr("ethaddr", enetaddr);
+ if (dh_mac_is_in_env("eth1addr"))
+ return 0;
+ if (dh_stm32_mac_is_in_ks8851())
+ return 0;
+
+ if (!dh_get_mac_from_eeprom(enetaddr, "eeprom0")) {
enetaddr[5]++;
- if (!skip_eth1)
- eth_env_set_enetaddr("eth1addr", enetaddr);
+ return eth_env_set_enetaddr("eth1addr", enetaddr);
}
+ return -ENXIO;
+}
+
+int setup_mac_address(void)
+{
+ if (dh_stm32_setup_ethaddr())
+ printf("%s: Unable to setup ethaddr!\n", __func__);
+
+ if (dh_stm32_setup_eth1addr())
+ printf("%s: Unable to setup eth1addr!\n", __func__);
+
return 0;
}
