[PATCH 2/2] ARM: imx6: dh-imx6: Enable d-cache early in SPL

[Philip Oberfichtner]

From: Marek Vasut <ma...@denx.de>

Enable d-cache early in SPL right after DRAM is started up.
This reduces U-Boot proper load time by 650ms when loaded
from SPI NOR.

Signed-off-by: Marek Vasut <ma...@denx.de>
Signed-off-by: Philip Oberfichtner <p...@denx.de>

---

 board/dhelectronics/dh_imx6/dh_imx6_spl.c | 27 +++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/board/dhelectronics/dh_imx6/dh_imx6_spl.c 
b/board/dhelectronics/dh_imx6/dh_imx6_spl.c
index e49e97724a..2c0ddc527a 100644
--- a/board/dhelectronics/dh_imx6/dh_imx6_spl.c
+++ b/board/dhelectronics/dh_imx6/dh_imx6_spl.c
@@ -6,6 +6,7 @@
  */
 
 #include <common.h>
+#include <cpu_func.h>
 #include <init.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/crm_regs.h>
@@ -14,11 +15,13 @@
 #include <asm/arch/mx6-ddr.h>
 #include <asm/arch/mx6-pins.h>
 #include <asm/arch/sys_proto.h>
+#include <asm/cache.h>
 #include <asm/gpio.h>
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/mach-imx/mxc_i2c.h>
 #include <asm/io.h>
+#include <asm/system.h>
 #include <errno.h>
 #include <fuse.h>
 #include <fsl_esdhc_imx.h>
@@ -610,6 +613,20 @@ static void dhcom_spl_dram_init(void)
        }
 }
 
+void dram_bank_mmu_setup(int bank)
+{
+       int i;
+
+       set_section_dcache(ROMCP_ARB_BASE_ADDR >> MMU_SECTION_SHIFT, 
DCACHE_DEFAULT_OPTION);
+       set_section_dcache(IRAM_BASE_ADDR >> MMU_SECTION_SHIFT, 
DCACHE_DEFAULT_OPTION);
+
+       for (i = MMDC0_ARB_BASE_ADDR >> MMU_SECTION_SHIFT;
+                       i < ((MMDC0_ARB_BASE_ADDR >> MMU_SECTION_SHIFT) +
+                       (SZ_1G >> MMU_SECTION_SHIFT));
+                       i++)
+               set_section_dcache(i, DCACHE_DEFAULT_OPTION);
+}
+
 void board_init_f(ulong dummy)
 {
        /* setup AIPS and disable watchdog */
@@ -636,9 +653,19 @@ void board_init_f(ulong dummy)
        /* DDR3 initialization */
        dhcom_spl_dram_init();
 
+       /* Set up early MMU tables at the beginning of DRAM and start d-cache */
+       gd->arch.tlb_addr = MMDC0_ARB_BASE_ADDR + SZ_32M;
+       gd->arch.tlb_size = PGTABLE_SIZE;
+       enable_caches();
+
        /* Clear the BSS. */
        memset(__bss_start, 0, __bss_end - __bss_start);
 
        /* load/boot image from boot device */
        board_init_r(NULL, 0);
 }
+
+void spl_board_prepare_for_boot(void)
+{
+       dcache_disable();
+}
-- 
2.37.1