Currently, U-Boot doesn't parse a "max-speed" DT property in a phy's
DT node. That property is a standard binding which should be honoured,
and in linux that is done by the core phy code via a call to an
of_set_phy_supported() helper. (Some ethernet drivers support a
max-speed property in their DT node, but that's orthogonal to what the
phy supports.)
Add a similar helper in U-Boot, and call it from phy_config().
Signed-off-by: Rasmus Villemoes <rasmus.villem...@prevas.dk>
---
Resending, this time including the u-boot list in recipients. Sorry
for the duplicate.
drivers/net/phy/phy.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index e6e1755518..ec690361e6 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -599,6 +599,20 @@ int phy_register(struct phy_driver *drv)
return 0;
}
+static int of_set_phy_supported(struct phy_device *phydev)
+{
+ ofnode node = phy_get_ofnode(phydev);
+ u32 max_speed;
+
+ if (!ofnode_valid(node))
+ return 0;
+
+ if (!ofnode_read_u32(node, "max-speed", &max_speed))
+ return phy_set_supported(phydev, max_speed);
+
+ return 0;
+}
+
int phy_set_supported(struct phy_device *phydev, u32 max_speed)
{
/* The default values for phydev->supported are provided by the PHY
@@ -1070,6 +1084,12 @@ __weak int board_phy_config(struct phy_device *phydev)
int phy_config(struct phy_device *phydev)
{
+ int ret;
+
+ ret = of_set_phy_supported(phydev);
+ if (ret)
+ return ret;
+
/* Invoke an optional board-specific helper */
return board_phy_config(phydev);
}
--
2.31.1
