On Tuesday 09 August 2022 12:07:00 Philip Oberfichtner wrote: > This converts CONFIG_SYS_L2_PL310 to Kconfig. ... > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > index 949ebb46ba..dde06bdd96 100644 > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -488,6 +488,10 @@ config TPL_SYS_THUMB_BUILD > density. For ARM architectures that support Thumb2 this flag will > result in Thumb2 code generated by GCC. > > +config SYS_L2_PL310 > + bool "ARM PL310 L2 cache controller" > + help > + Enable support for ARM PL310 L2 cache controller in U-Boot > > config SYS_L2CACHE_OFF > bool "L2cache off" > diff --git a/arch/arm/mach-mvebu/include/mach/config.h > b/arch/arm/mach-mvebu/include/mach/config.h > index 4add0d9e10..0bba0a4cf9 100644 > --- a/arch/arm/mach-mvebu/include/mach/config.h > +++ b/arch/arm/mach-mvebu/include/mach/config.h > @@ -25,8 +25,6 @@ > #define MV88F78X60 /* for the DDR training bin_hdr code */ > #endif > > -#define CONFIG_SYS_L2_PL310 > - > #define MV_UART_CONSOLE_BASE MVEBU_UART0_BASE > > /* Needed for SPI NOR booting in SPL */
This option is required for mvebu SoC and is not user (de)-selectable. So please do not define it in each individual mvebu board. It would make it harder to introduce a new mvebu board into U-Boot. Instead enable it for mvebu SoCs like it was before this change. It can be done e.g. by "select" Kconfig keyword in mvebu Kconfig file.
