On 8/13/22 14:03, Fabio Estevam wrote:
From: Fabio Estevam <[email protected]>
When running the script to sign SPL/U-Boot on a kontron-sl-mx8mm board,
the fit_block_size was calculated as 0x1000 instead of 0x1020.
Add an extra parenthesis pair to fix it.
Signed-off-by: Fabio Estevam <[email protected]>
---
Hi Stefano,
This one applies against u-boot-imx.
Since this one has not reached mainline yet, it is OK
if you want to squash this change in the original commit.
doc/imx/habv4/csf_examples/mx8m/csf.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/imx/habv4/csf_examples/mx8m/csf.sh
b/doc/imx/habv4/csf_examples/mx8m/csf.sh
index 6898513be51f..7d267a7218d3 100644
--- a/doc/imx/habv4/csf_examples/mx8m/csf.sh
+++ b/doc/imx/habv4/csf_examples/mx8m/csf.sh
@@ -40,7 +40,7 @@ dd if=csf_spl.bin of=flash.bin bs=1 seek=${spl_dd_offset}
conv=notrunc
# fitImage tree
fit_block_base=$(printf "0x%x" $(( $(sed -n "/CONFIG_SYS_TEXT_BASE=/ s@.*=@@p" .config)
- $(sed -n "/CONFIG_FIT_EXTERNAL_OFFSET=/ s@.*=@@p" .config) - 0x200 - 0x40)) )
fit_block_offset=$(printf "0x%s" $(fdtget -t x u-boot.dtb
/binman/imx-boot/uboot offset))
-fit_block_size=$(printf "0x%x" $(( ( $(fdtdump u-boot.itb 2>/dev/null | sed -n
"/^...totalsize:/ s@.*\(0x[0-9a-f]\+\).*@\1@p") + 0x1000 - 0x1 ) & ~(0x1000 - 0x1) + 0x20 ))
)
+fit_block_size=$(printf "0x%x" $(( ( ($(fdtdump u-boot.itb 2>/dev/null | sed -n
"/^...totalsize:/ s@.*\(0x[0-9a-f]\+\).*@\1@p") + 0x1000 - 0x1 ) & ~(0x1000 - 0x1)) + 0x20
)) )
sed -i "/Blocks = / s@.*@ Blocks = $fit_block_base $fit_block_offset $fit_block_size
\"flash.bin\", \\\\@" csf_fit.tmp
Reviewed-by: Marek Vasut <[email protected]>
