I am trying to upgrade from u-boot-1.3.4 to u-boot-2010.9. My processor is an
MPC8248. When my custom board boots up, I read an incorrect value from
read-only programmable logic device (PLD) memory. Using the BDI2000, I have
verified that the value in the PLD is what it was programmed to be. Using
u-boot's md command, I get the same incorrect value that I got from my code by
dereferencing a pointer to the address. With u-boot-1.3.4, the md command
reads the PLD memory correctly, as does my code.
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
