Have CONFIG_ENV_ADDR be based on CONFIG_ENV_OFFSET rather than the other way around so that we can use CONFIG_ENV_OFFSET during build. It also avoids a little address duplication.
Signed-off-by: Mike Frysinger <vap...@gentoo.org> --- include/configs/bf561-ezkit.h | 4 ++-- include/configs/ibf-dsp561.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h index 7081d5f..33c7e18 100644 --- a/include/configs/bf561-ezkit.h +++ b/include/configs/bf561-ezkit.h @@ -80,8 +80,8 @@ #define CONFIG_SYS_MAX_FLASH_SECT 135 /* The BF561-EZKIT uses a top boot flash */ #define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR 0x20004000 -#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) +#define CONFIG_ENV_OFFSET 0x4000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x10000 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS) diff --git a/include/configs/ibf-dsp561.h b/include/configs/ibf-dsp561.h index f3d6c8b..055f8a0 100644 --- a/include/configs/ibf-dsp561.h +++ b/include/configs/ibf-dsp561.h @@ -80,8 +80,8 @@ #define CONFIG_SYS_MAX_FLASH_SECT 135 /* max number of sectors on one chip */ /* The BF561-EZKIT uses a top boot flash */ #define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR 0x20004000 -#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) +#define CONFIG_ENV_OFFSET 0x4000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS) -- 1.7.3.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
