Hi William,
Le 22/08/2022 à 20:39, William Zhang a écrit :
As CONFIG_ARCH_BCM6858 is replaced with CONFIG_BCM6858, update the
driver Kconfig to use the new config symbol.
Signed-off-by: William Zhang <william.zh...@broadcom.com>
Reviewed-by: Philippe Reynes <philippe.rey...@softathome.com>
---
Changes in v2:
-Update subject line to be more clear for patch 3
drivers/gpio/Kconfig | 3 +--
drivers/led/Kconfig | 2 +-
drivers/mtd/nand/raw/Kconfig | 2 +-
drivers/spi/Kconfig | 3 +--
drivers/watchdog/Kconfig | 3 +--
5 files changed, 5 insertions(+), 8 deletions(-)
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 9e00b48234ab..929f3fb9eacb 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -111,8 +111,7 @@ config BCM2835_GPIO
config BCM6345_GPIO
bool "BCM6345 GPIO driver"
depends on DM_GPIO && (ARCH_BMIPS || BCM6856 || \
- ARCH_BCM6858 || BCM63158 || \
- ARCH_BCM6753)
+ BCM6858 || BCM63158 || ARCH_BCM6753)
help
This driver supports the GPIO banks on BCM6345 SoCs.
diff --git a/drivers/led/Kconfig b/drivers/led/Kconfig
index bd8f23fd9631..98f015a07f97 100644
--- a/drivers/led/Kconfig
+++ b/drivers/led/Kconfig
@@ -37,7 +37,7 @@ config LED_BCM6753
config LED_BCM6858
bool "LED Support for BCM6858"
- depends on LED && (BCM6856 || ARCH_BCM6858 || BCM63158)
+ depends on LED && (BCM6856 || BCM6858 || BCM63158)
help
This option enables support for LEDs connected to the BCM6858
HW has blinking capabilities and up to 32 LEDs can be controlled.
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 5d006ca1ea07..f8445e09633c 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -115,7 +115,7 @@ config NAND_BRCMNAND_6838
config NAND_BRCMNAND_6858
bool "Support Broadcom NAND controller on bcm6858"
- depends on NAND_BRCMNAND && ARCH_BCM6858
+ depends on NAND_BRCMNAND && BCM6858
help
Enable support for broadcom nand driver on bcm6858.
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 978e5c86a420..e815a715f9b2 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -91,8 +91,7 @@ config ATMEL_SPI
config BCM63XX_HSSPI
bool "BCM63XX HSSPI driver"
- depends on (ARCH_BMIPS || BCM6856 || \
- ARCH_BCM6858 || BCM63158)
+ depends on (ARCH_BMIPS || BCM6856 || BCM6858 || BCM63158)
help
Enable the BCM6328 HSSPI driver. This driver can be used to
access the SPI NOR flash on platforms embedding this Broadcom
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 6d559515b78b..84a4034fe87c 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -129,8 +129,7 @@ config WDT_AT91
config WDT_BCM6345
bool "BCM6345 watchdog timer support"
depends on WDT && (ARCH_BMIPS || BCM6856 || \
- ARCH_BCM6858 || BCM63158 || \
- ARCH_BCM6753)
+ BCM6858 || BCM63158 || ARCH_BCM6753)
help
Select this to enable watchdog timer for BCM6345 SoCs.
The watchdog timer is stopped when initialized.
