Hi William,

Le 22/08/2022 à 20:49, William Zhang a écrit :
BCM6753 is essentially same as the main chip BCM6855 but with different
SKU number. Now that BCM6855 is supported under CONFIG_ARCH_BCMBCA and
CONFIG_BCM6855, remove the original ARCH_BCM6753 support and migrate its
configuration and dts settings. This includes:
- Remove the bcm96753ref board folder. It is replaced by the
generic bcmbca board folder.
- Merge the 6753.dtsi setting to the new 6855.dtsi file. Update
96753ref board dts with the new compatible string.
- Delete broadcom_bcm96763ref.h and merge its setting to the new
bcm96855.h file.
- Delete bcm96753ref_ram_defconfig and use a basic config version of
bcm96855_defconfig

Signed-off-by: William Zhang <william.zh...@broadcom.com>


Reviewed-by: Philippe Reynes <philippe.rey...@softathome.com>


---

(no changes since v1)

  arch/arm/Kconfig                         |   8 -
  arch/arm/dts/Makefile                    |   6 +-
  arch/arm/dts/bcm6753.dtsi                | 208 -----------------------
  arch/arm/dts/bcm6855.dtsi                | 137 +++++++++++++++
  arch/arm/dts/bcm96753ref.dts             |   6 +-
  board/broadcom/bcm96753ref/Kconfig       |  16 --
  board/broadcom/bcm96753ref/MAINTAINERS   |   6 -
  board/broadcom/bcm96753ref/Makefile      |   3 -
  board/broadcom/bcm96753ref/bcm96753ref.c |  40 -----
  configs/bcm96753ref_ram_defconfig        |  87 ----------
  include/configs/bcm96855.h               |   4 +
  include/configs/broadcom_bcm96753ref.h   |  32 ----
  12 files changed, 146 insertions(+), 407 deletions(-)
  delete mode 100644 arch/arm/dts/bcm6753.dtsi
  delete mode 100644 board/broadcom/bcm96753ref/Kconfig
  delete mode 100644 board/broadcom/bcm96753ref/MAINTAINERS
  delete mode 100644 board/broadcom/bcm96753ref/Makefile
  delete mode 100644 board/broadcom/bcm96753ref/bcm96753ref.c
  delete mode 100644 configs/bcm96753ref_ram_defconfig
  delete mode 100644 include/configs/broadcom_bcm96753ref.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 063616ff8d0b..c1f195e9d106 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -665,13 +665,6 @@ config ARCH_BCM283X
        imply CMD_DM
        imply FAT_WRITE
-config ARCH_BCM6753
-       bool "Broadcom BCM6753 family"
-       select CPU_V7A
-       select DM
-       select OF_CONTROL
-       imply CMD_DM
-
  config ARCH_BCMSTB
        bool "Broadcom BCM7XXX family"
        select CPU_V7A
@@ -2267,7 +2260,6 @@ source "board/Marvell/octeontx2/Kconfig"
  source "board/armltd/vexpress/Kconfig"
  source "board/armltd/vexpress64/Kconfig"
  source "board/cortina/presidio-asic/Kconfig"
-source "board/broadcom/bcm96753ref/Kconfig"
  source "board/broadcom/bcmns3/Kconfig"
  source "board/cavium/thunderx/Kconfig"
  source "board/eets/pdu001/Kconfig"
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 5fd38cc63b63..8fba735cc8ab 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1147,9 +1147,6 @@ dtb-$(CONFIG_ARCH_BCM283X) += \
        bcm2837-rpi-cm3-io3.dtb \
        bcm2711-rpi-4-b.dtb
-dtb-$(CONFIG_ARCH_BCM6753) += \
-       bcm96753ref.dtb
-
  dtb-$(CONFIG_TARGET_BCMNS3) += ns3-board.dtb
dtb-$(CONFIG_ARCH_BCMSTB) += bcm7xxx.dtb
@@ -1177,7 +1174,8 @@ dtb-$(CONFIG_BCM6813) += \
  dtb-$(CONFIG_BCM6846) += \
        bcm96846.dtb
  dtb-$(CONFIG_BCM6855) += \
-       bcm96855.dtb
+       bcm96855.dtb \
+       bcm96753ref.dtb
  dtb-$(CONFIG_BCM6856) += \
        bcm96856.dtb \
        bcm968360bg.dtb
diff --git a/arch/arm/dts/bcm6753.dtsi b/arch/arm/dts/bcm6753.dtsi
deleted file mode 100644
index e88ab095c290..000000000000
--- a/arch/arm/dts/bcm6753.dtsi
+++ /dev/null
@@ -1,208 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2022 Philippe Reynes <philippe.rey...@softathome.com>
- */
-
-#include "skeleton.dtsi"
-
-/ {
-       compatible = "brcm,bcm6753";
-       #address-cells = <1>;
-       #size-cells = <1>;
-
-       cpus {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               u-boot,dm-pre-reloc;
-
-               cpu0: cpu@0 {
-                       compatible = "arm,cortex-a7";
-                       device_type = "cpu";
-                       reg = <0x0>;
-                       next-level-cache = <&l2>;
-                       u-boot,dm-pre-reloc;
-               };
-
-               cpu1: cpu@1 {
-                       compatible = "arm,cortex-a7";
-                       device_type = "cpu";
-                       reg = <0x1>;
-                       next-level-cache = <&l2>;
-                       u-boot,dm-pre-reloc;
-               };
-
-               cpu2: cpu@2 {
-                       compatible = "arm,cortex-a7";
-                       device_type = "cpu";
-                       reg = <0x2>;
-                       next-level-cache = <&l2>;
-                       u-boot,dm-pre-reloc;
-               };
-
-               l2: l2-cache0 {
-                       compatible = "cache";
-                       u-boot,dm-pre-reloc;
-               };
-       };
-
-       clocks {
-               compatible = "simple-bus";
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-               u-boot,dm-pre-reloc;
-
-               periph_osc: periph-osc {
-                       compatible = "fixed-clock";
-                       #clock-cells = <0>;
-                       clock-frequency = <200000000>;
-                       u-boot,dm-pre-reloc;
-               };
-
-               hsspi_pll: hsspi-pll {
-                       compatible = "fixed-factor-clock";
-                       #clock-cells = <0>;
-                       clocks = <&periph_osc>;
-                       clock-mult = <2>;
-                       clock-div = <1>;
-               };
-
-               refclk50mhz: refclk50mhz {
-                       compatible = "fixed-clock";
-                       #clock-cells = <0>;
-                       clock-frequency = <50000000>;
-               };
-       };
-
-       ubus {
-               compatible = "simple-bus";
-               #address-cells = <1>;
-               #size-cells = <1>;
-               u-boot,dm-pre-reloc;
-
-               uart0: serial@ff812000 {
-                       compatible = "arm,pl011", "arm,primecell";
-                       reg = <0xff812000 0x1000>;
-                       clock = <50000000>;
-
-                       status = "disabled";
-               };
-
-               wdt1: watchdog@ff800480 {
-                       compatible = "brcm,bcm6345-wdt";
-                       reg = <0xff800480 0x14>;
-                       clocks = <&refclk50mhz>;
-               };
-
-               wdt2: watchdog@ff8004c0 {
-                       compatible = "brcm,bcm6345-wdt";
-                       reg = <0xff8004c0 0x14>;
-                       clocks = <&refclk50mhz>;
-               };
-
-               wdt-reboot {
-                       compatible = "wdt-reboot";
-                       wdt = <&wdt1>;
-               };
-
-               gpio0: gpio-controller@0xff800500 {
-                       compatible = "brcm,bcm6345-gpio";
-                       reg = <0xff800500 0x4>,
-                             <0xff800520 0x4>;
-                       gpio-controller;
-                       #gpio-cells = <2>;
-
-                       status = "disabled";
-               };
-
-               gpio1: gpio-controller@0xff800504 {
-                       compatible = "brcm,bcm6345-gpio";
-                       reg = <0xff800504 0x4>,
-                             <0xff800524 0x4>;
-                       gpio-controller;
-                       #gpio-cells = <2>;
-
-                       status = "disabled";
-               };
-
-               gpio2: gpio-controller@0xff800508 {
-                       compatible = "brcm,bcm6345-gpio";
-                       reg = <0xff800508 0x4>,
-                             <0xff800528 0x4>;
-                       gpio-controller;
-                       #gpio-cells = <2>;
-
-                       status = "disabled";
-               };
-
-               gpio3: gpio-controller@0xff80050c {
-                       compatible = "brcm,bcm6345-gpio";
-                       reg = <0xff80050c 0x4>,
-                             <0xff80052c 0x4>;
-                       gpio-controller;
-                       #gpio-cells = <2>;
-
-                       status = "disabled";
-               };
-
-               gpio4: gpio-controller@0xff800510 {
-                       compatible = "brcm,bcm6345-gpio";
-                       reg = <0xff800510 0x4>,
-                             <0xff800530 0x4>;
-                       gpio-controller;
-                       #gpio-cells = <2>;
-
-                       status = "disabled";
-               };
-
-               gpio5: gpio-controller@0xff800514 {
-                       compatible = "brcm,bcm6345-gpio";
-                       reg = <0xff800514 0x4>,
-                             <0xff800534 0x4>;
-                       gpio-controller;
-                       #gpio-cells = <2>;
-
-                       status = "disabled";
-               };
-
-               gpio6: gpio-controller@0xff800518 {
-                       compatible = "brcm,bcm6345-gpio";
-                       reg = <0xff800518 0x4>,
-                             <0xff800538 0x4>;
-                       gpio-controller;
-                       #gpio-cells = <2>;
-
-                       status = "disabled";
-               };
-
-               gpio7: gpio-controller@0xff80051c {
-                       compatible = "brcm,bcm6345-gpio";
-                       reg = <0xff80051c 0x4>,
-                             <0xff80053c 0x4>;
-                       gpio-controller;
-                       #gpio-cells = <2>;
-
-                       status = "disabled";
-               };
-
-               nand: nand-controller@ff801800 {
-                       compatible = "brcm,nand-bcm6753",
-                                    "brcm,brcmnand-v5.0",
-                                    "brcm,brcmnand";
-                       reg-names = "nand", "nand-int-base", "nand-cache";
-                       reg = <0xff801800 0x180>,
-                             <0xff802000 0x10>,
-                             <0xff801c00 0x200>;
-                       parameter-page-big-endian = <0>;
-
-                       status = "disabled";
-               };
-
-               leds: led-controller@ff803000 {
-                       compatible = "brcm,bcm6753-leds";
-                       reg = <0xff803000 0x3480>;
-
-                       status = "disabled";
-               };
-       };
-};
diff --git a/arch/arm/dts/bcm6855.dtsi b/arch/arm/dts/bcm6855.dtsi
index 620f51aee1a2..05e0a4e0da7c 100644
--- a/arch/arm/dts/bcm6855.dtsi
+++ b/arch/arm/dts/bcm6855.dtsi
@@ -1,5 +1,6 @@
  // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  /*
+ * Copyright (C) 2022 Philippe Reynes <philippe.rey...@softathome.com>
   * Copyright 2022 Broadcom Ltd.
   */
@@ -64,6 +65,8 @@
        };
clocks: clocks {
+               u-boot,dm-pre-reloc;
+
                periph_clk: periph-clk {
                        compatible = "fixed-clock";
                        #clock-cells = <0>;
@@ -77,6 +80,22 @@
                        clock-div = <4>;
                        clock-mult = <1>;
                };
+
+               hsspi_pll: hsspi-pll {
+                       compatible = "fixed-factor-clock";
+                       #clock-cells = <0>;
+                       clocks = <&periph_clk>;
+                       clock-mult = <2>;
+                       clock-div = <1>;
+               };
+
+               wdt_clk: wdt-clk {
+                       compatible = "fixed-factor-clock";
+                       #clock-cells = <0>;
+                       clocks = <&periph_clk>;
+                       clock-div = <4>;
+                       clock-mult = <1>;
+               };
        };
psci {
@@ -107,6 +126,7 @@
                #address-cells = <1>;
                #size-cells = <1>;
                ranges = <0 0xff800000 0x800000>;
+               u-boot,dm-pre-reloc;
uart0: serial@12000 {
                        compatible = "arm,pl011", "arm,primecell";
@@ -116,5 +136,122 @@
                        clock-names = "uartclk", "apb_pclk";
                        status = "disabled";
                };
+
+               wdt1: watchdog@480 {
+                       compatible = "brcm,bcm6345-wdt";
+                       reg = <0x480 0x14>;
+                       clocks = <&wdt_clk>;
+               };
+
+               wdt2: watchdog@4c0 {
+                       compatible = "brcm,bcm6345-wdt";
+                       reg = <0x4c0 0x14>;
+                       clocks = <&wdt_clk>;
+               };
+
+               wdt-reboot {
+                       compatible = "wdt-reboot";
+                       wdt = <&wdt1>;
+               };
+
+               gpio0: gpio-controller@500 {
+                       compatible = "brcm,bcm6345-gpio";
+                       reg = <0x500 0x4>,
+                             <0x520 0x4>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       status = "disabled";
+               };
+
+               gpio1: gpio-controller@504 {
+                       compatible = "brcm,bcm6345-gpio";
+                       reg = <0x504 0x4>,
+                             <0x524 0x4>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       status = "disabled";
+               };
+
+               gpio2: gpio-controller@508 {
+                       compatible = "brcm,bcm6345-gpio";
+                       reg = <0x508 0x4>,
+                             <0x528 0x4>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       status = "disabled";
+               };
+
+               gpio3: gpio-controller@50c {
+                       compatible = "brcm,bcm6345-gpio";
+                       reg = <0x50c 0x4>,
+                             <0x52c 0x4>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       status = "disabled";
+               };
+
+               gpio4: gpio-controller@510 {
+                       compatible = "brcm,bcm6345-gpio";
+                       reg = <0x510 0x4>,
+                             <0x530 0x4>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       status = "disabled";
+               };
+
+               gpio5: gpio-controller@514 {
+                       compatible = "brcm,bcm6345-gpio";
+                       reg = <0x514 0x4>,
+                             <0x534 0x4>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       status = "disabled";
+               };
+
+               gpio6: gpio-controller@518 {
+                       compatible = "brcm,bcm6345-gpio";
+                       reg = <0x518 0x4>,
+                             <0x538 0x4>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       status = "disabled";
+               };
+
+               gpio7: gpio-controller@51c {
+                       compatible = "brcm,bcm6345-gpio";
+                       reg = <0x51c 0x4>,
+                             <0x53c 0x4>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       status = "disabled";
+               };
+
+               nand: nand-controller@1800 {
+                       compatible = "brcm,nand-bcm6753",
+                                    "brcm,brcmnand-v5.0",
+                                    "brcm,brcmnand";
+                       reg-names = "nand", "nand-int-base", "nand-cache";
+                       reg = <0x1800 0x180>,
+                             <0x2000 0x10>,
+                             <0x1c00 0x200>;
+                       parameter-page-big-endian = <0>;
+
+                       status = "disabled";
+               };
+
+               leds: led-controller@3000 {
+                       compatible = "brcm,bcm6753-leds";
+                       reg = <0x3000 0x3480>;
+
+                       status = "disabled";
+               };
        };
  };
diff --git a/arch/arm/dts/bcm96753ref.dts b/arch/arm/dts/bcm96753ref.dts
index ca15ca5f108d..f74137f18f46 100644
--- a/arch/arm/dts/bcm96753ref.dts
+++ b/arch/arm/dts/bcm96753ref.dts
@@ -5,13 +5,13 @@
/dts-v1/; -#include "bcm6753.dtsi"
+#include "bcm6855.dtsi"
#include <dt-bindings/gpio/gpio.h> / {
-       model = "Broadcom bcm6753ref";
-       compatible = "broadcom,bcm6753ref", "brcm,bcm6753";
+       model = "Broadcom BCM96753REF Reference Board";
+       compatible = "brcm,bcm96753ref", "brcm,bcm6855", "brcm,bcmbca";
aliases {
                serial0 = &uart0;
diff --git a/board/broadcom/bcm96753ref/Kconfig 
b/board/broadcom/bcm96753ref/Kconfig
deleted file mode 100644
index 479e7905787b..000000000000
--- a/board/broadcom/bcm96753ref/Kconfig
+++ /dev/null
@@ -1,16 +0,0 @@
-if TARGET_BCM96753REF
-
-config SYS_VENDOR
-       default "broadcom"
-
-config SYS_BOARD
-       default "bcm96753ref"
-
-config SYS_CONFIG_NAME
-       default "broadcom_bcm96753ref"
-
-endif
-
-config TARGET_BCM96753REF
-       bool "Support Broadcom bcm96753ref"
-       depends on ARCH_BCM6753
diff --git a/board/broadcom/bcm96753ref/MAINTAINERS 
b/board/broadcom/bcm96753ref/MAINTAINERS
deleted file mode 100644
index be060f5a709c..000000000000
--- a/board/broadcom/bcm96753ref/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-BROADCOM BCM96753REF
-M:     Philippe Reynes <philippe.rey...@softathome.com>
-S:     Maintained
-F:     board/broadcom/bcm96753ref
-F:     include/configs/broadcom_bcm96753ref.h
-F:     configs/bcm96753ref_ram_defconfig
diff --git a/board/broadcom/bcm96753ref/Makefile 
b/board/broadcom/bcm96753ref/Makefile
deleted file mode 100644
index a1fa2bff8670..000000000000
--- a/board/broadcom/bcm96753ref/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-
-obj-y  += bcm96753ref.o
diff --git a/board/broadcom/bcm96753ref/bcm96753ref.c 
b/board/broadcom/bcm96753ref/bcm96753ref.c
deleted file mode 100644
index bf78d843aa57..000000000000
--- a/board/broadcom/bcm96753ref/bcm96753ref.c
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2022 Philippe Reynes <philippe.rey...@softathome.com>
- */
-
-#include <common.h>
-#include <fdtdec.h>
-#include <linux/io.h>
-#include <cpu_func.h>
-
-int board_init(void)
-{
-       return 0;
-}
-
-int dram_init(void)
-{
-       if (fdtdec_setup_mem_size_base() != 0)
-               printf("fdtdec_setup_mem_size_base() has failed\n");
-
-       return 0;
-}
-
-int dram_init_banksize(void)
-{
-       fdtdec_setup_memory_banksize();
-
-       return 0;
-}
-
-int print_cpuinfo(void)
-{
-       return 0;
-}
-
-void enable_caches(void)
-{
-       icache_enable();
-       dcache_enable();
-}
diff --git a/configs/bcm96753ref_ram_defconfig 
b/configs/bcm96753ref_ram_defconfig
deleted file mode 100644
index 59ac1cdf7e1e..000000000000
--- a/configs/bcm96753ref_ram_defconfig
+++ /dev/null
@@ -1,87 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SKIP_LOWLEVEL_INIT=y
-CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y
-CONFIG_SYS_ARCH_TIMER=y
-CONFIG_ARCH_BCM6753=y
-CONFIG_SYS_TEXT_BASE=0x1000000
-CONFIG_SYS_MALLOC_F_LEN=0x1000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x20000
-CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="bcm96753ref"
-CONFIG_ARMV7_LPAE=y
-CONFIG_SYS_LOAD_ADDR=0x1000000
-CONFIG_TARGET_BCM96753REF=y
-CONFIG_ENV_VARS_UBOOT_CONFIG=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_FIT=y
-CONFIG_FIT_SIGNATURE=y
-CONFIG_FIT_CIPHER=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_LEGACY_IMAGE_FORMAT=y
-CONFIG_SUPPORT_RAW_INITRD=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-# CONFIG_AUTOBOOT is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_MAXARGS=24
-CONFIG_SYS_CBSIZE=256
-CONFIG_SYS_PBSIZE=276
-# CONFIG_CMD_BOOTD is not set
-# CONFIG_BOOTM_NETBSD is not set
-# CONFIG_BOOTM_PLAN9 is not set
-# CONFIG_BOOTM_RTEMS is not set
-# CONFIG_BOOTM_VXWORKS is not set
-# CONFIG_CMD_ELF is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EXPORTENV is not set
-# CONFIG_CMD_IMPORTENV is not set
-# CONFIG_CMD_EDITENV is not set
-# CONFIG_CMD_SAVEENV is not set
-# CONFIG_CMD_ENV_EXISTS is not set
-# CONFIG_CMD_CRC32 is not set
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_GPIO=y
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_MTD=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_WDT=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_CMD_UBI=y
-# CONFIG_CMD_UBIFS is not set
-# CONFIG_NET is not set
-CONFIG_REGMAP=y
-CONFIG_SYSCON=y
-CONFIG_BUTTON=y
-CONFIG_BUTTON_GPIO=y
-CONFIG_CLK=y
-CONFIG_BCM6345_GPIO=y
-# CONFIG_INPUT is not set
-CONFIG_LED=y
-CONFIG_LED_BCM6753=y
-CONFIG_LED_BLINK=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_DM_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_BRCMNAND=y
-CONFIG_NAND_BRCMNAND_6753=y
-CONFIG_PINCTRL=y
-CONFIG_PINCONF=y
-CONFIG_SPECIFY_CONSOLE_INDEX=y
-CONFIG_DM_SERIAL=y
-CONFIG_PL01X_SERIAL=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_SPI_MEM=y
-CONFIG_SYSRESET=y
-CONFIG_SYSRESET_WATCHDOG=y
-CONFIG_WDT_BCM6345=y
-CONFIG_REGEX=y
diff --git a/include/configs/bcm96855.h b/include/configs/bcm96855.h
index 6e420f2c66fb..ba2d8a317d25 100644
--- a/include/configs/bcm96855.h
+++ b/include/configs/bcm96855.h
@@ -8,4 +8,8 @@
#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#ifdef CONFIG_MTD_RAW_NAND
+#define CONFIG_SYS_MAX_NAND_DEVICE     1
+#endif /* CONFIG_MTD_RAW_NAND */
+
  #endif
diff --git a/include/configs/broadcom_bcm96753ref.h 
b/include/configs/broadcom_bcm96753ref.h
deleted file mode 100644
index 33c70c73c1fc..000000000000
--- a/include/configs/broadcom_bcm96753ref.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2022 Philippe Reynes <philippe.rey...@softathome.com>
- */
-
-#include <linux/sizes.h>
-
-/*
- * common
- */
-
-/* UART */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, \
-                                         230400, 500000, 1500000 }
-/* Memory usage */
-
-/*
- * 6853
- */
-
-/* RAM */
-#define CONFIG_SYS_SDRAM_BASE          0x00000000
-
-/* U-Boot */
-
-#ifdef CONFIG_MTD_RAW_NAND
-#define CONFIG_SYS_MAX_NAND_DEVICE     1
-#endif /* CONFIG_MTD_RAW_NAND */
-
-/*
- * 96753ref
- */

Reply via email to