On Wed, 2022-08-31 at 20:27 -0600, Simon Glass wrote: > «Внимание! Данное письмо от внешнего адресата!» > > Hi Viacheslav, > > On Tue, 30 Aug 2022 at 07:00, Viacheslav Mitrofanov > <[email protected]> wrote: > > This patch set adds basic IPv6 support to U-boot. > > It is based on Chris's Packham patches > > (https://lists.denx.de/pipermail/u-boot/2017-January/279366.html) > > Chris's patches were taken as base. There were efforts to launch it > > on HiFive > > SiFive Unmatched board but the board didn't work well. The code was > > refactored, > > fixed some bugs as CRC for little-endian, some parts were > > implemented in our own > > way, something was taken from Linux. Finally we did manual tests > > and the board > > worked well. > > > > Testing was done on HiFive SiFive Unmatched board (RISC-V) > > > > Signed-off-by: Viacheslav Mitrofanov <[email protected]> > > > > --- > > Changes in v2: > > - Split big patches into smaller > > - If an address in tftpboot is IPv6 than use IPv6 to boot > > - Add tests > > > > Viacheslav Mitrofanov (17): > > net: ipv6: Add IPv6 basic primitives > > net: ipv6: Add IPv6 build options > > net: ipv6: Add callbacks declarations to get access to IPv6 > > variables > > net: ipv6: Add Neighbor Discovery Protocol (NDP) > > net: ipv6: Add string_to_ip6 converter > > net: ipv6: Enable IPv6 typeconversion specifier > > net: ipv6: Add ip6addr, gatewayip6, serverip6 variables callbacks > > net: ipv6: Add implementation of main IPv6 functions > > net: ipv6: Incorporate IPv6 support into u-boot net subsystem > > net: tftp: Add IPv6 support for tftpboot > > net: ping6: Add ping6 command > > test: dm: eth: Add string_to_ip6 test > > test: dm: eth: Add csum_ipv6_magic test > > test: dm: eth: Add ip6_addr_in_subnet test > > test: dm: eth: Add ip6_make_snma test > > test: dm: eth: Add ip6_make_lladdr test > > test/py: add a ping6 test > > > > cmd/Kconfig | 7 + > > cmd/net.c | 48 ++++ > > include/env_callback.h | 10 + > > include/env_flags.h | 10 + > > include/ndisc.h | 65 +++++ > > include/net.h | 4 +- > > include/net6.h | 312 ++++++++++++++++++++++++ > > lib/net_utils.c | 122 ++++++++++ > > lib/vsprintf.c | 11 +- > > net/Kconfig | 4 + > > net/Makefile | 3 + > > net/ndisc.c | 276 ++++++++++++++++++++++ > > net/net.c | 70 +++++- > > net/net6.c | 484 > > ++++++++++++++++++++++++++++++++++++++ > > net/ping6.c | 117 +++++++++ > > net/tftp.c | 62 ++++- > > test/dm/eth.c | 140 +++++++++++ > > test/py/tests/test_net.py | 15 ++ > > 18 files changed, 1741 insertions(+), 19 deletions(-) > > create mode 100644 include/ndisc.h > > create mode 100644 include/net6.h > > create mode 100644 net/ndisc.c > > create mode 100644 net/net6.c > > create mode 100644 net/ping6.c > > This is very nicely put together. I added some comments about missing > comments and other minor things. > > I didn't try the ping6 test - does it need any special environment to > work? > > Regards, > Simon
Hello, Simon! Many thanks for your response! I do agree with your notes. I'm going to follow them, so sooner I'll send new patch series. Thanks!
