Current behavior is that eth_phy_get_mdio_bus Net: FEC: can't find phy-handle
ZYNQ GEM: ff0b0000, mdio bus ff0b0000, phyaddr 0, interface sgmii eth0: ethernet@ff0b0000 Net: ZYNQ GEM: ff0b0000, mdio bus ff0b0000, phyaddr 0, interface sgmii eth0: ethernet@ff0b0000 Signed-off-by: Michal Simek <[email protected]> --- arch/arm/dts/zynqmp-e-a2197-00-revA.dts | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/arm/dts/zynqmp-e-a2197-00-revA.dts b/arch/arm/dts/zynqmp-e-a2197-00-revA.dts index 4940825b002f..3fa18f560c9c 100644 --- a/arch/arm/dts/zynqmp-e-a2197-00-revA.dts +++ b/arch/arm/dts/zynqmp-e-a2197-00-revA.dts @@ -155,8 +155,12 @@ phy-handle = <&phy0>; phy-mode = "sgmii"; is-internal-pcspma; - phy0: ethernet-phy@0 { /* u131 M88E1512 */ - reg = <0>; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@0 { /* u131 M88E1512 */ + reg = <0>; + }; }; }; -- 2.36.1
