Hi Marcel, Am Di., 6. Sept. 2022 um 16:05 Uhr schrieb Marcel Ziswiler <[email protected]>: > > Hi Heiko > > On Tue, 2022-09-06 at 14:36 +0200, Heiko Thiery wrote: > > Hi Marcel and all, > > > > > > Am Do., 21. Juli 2022 um 15:48 Uhr schrieb Marcel Ziswiler > > <[email protected]>: > > > > > > From: Marcel Ziswiler <[email protected]> > > > > > > Synchronise device tree with linux v5.19-rc5. > > > > > > Signed-off-by: Marcel Ziswiler <[email protected]> > > > --- > > > > > > arch/arm/dts/imx8mq-evk.dts | 65 ++++++- > > > > I just tried the current master on imx8mq-evk and figured out that it > > doesn't start. I did a git bisect and saw that the dtb sync seems to > > be responsible for that. Can anyone else confirm that? > > Remember, that series went in a little pre-maturely. Meanwhile, I posted > a resp two refreshs [1] [2]. Would that maybe fix it? Otherwise, I guess > somebody with that actual hardware would need figuring out what may go > wrong resp. requires further patching the U-Boot specific device tree. >
No I was not aware of that .. But meanwhile I figured out that when removing the node "hdmi_phy_27m" the board starts again. > [1] https://lore.kernel.org/all/[email protected]/ > [2] https://lore.kernel.org/all/[email protected]/ > > [snip] > > Cheers > > Marcel -- Heiko
