Thanks Vaibhav! I will check this out. Regards, Shyama. -----Original Message----- From: Bedia, Vaibhav [mailto:vaibhav.be...@ti.com] Sent: Friday, December 31, 2010 9:43 AM To: Asokan, Shyama Trikkadeeri; U-Boot@lists.denx.de Subject: RE: [U-Boot] Regarding the config.mk in U-boot TOP directory
On Thursday, December 30, 2010 6:51 PM, Asokan, Shyama Trikkadeeri wrote: > Hi Wolfgang, > I have been facing an issue while building u-boot for AT91SAM9263ek > board. The environment I am using is CYGWIN and toolchain is the > Code sourcery toolchain. > > > The make configuration step works fine while "make CROSS_COMPILE " > step throws the following error: > make CROSS_COMPILE=arm-none-linux-gnueabi- > Generating include/autoconf.mk > include/common.h:37: fatal error: config.h: No such file or > directory compilation terminated. > Generating include/autoconf.mk.dep > include/common.h:37: fatal error: config.h: No such file or > directory compilation terminated. > make: *** [include/autoconf.mk.dep] Error 1 While going through the > files in u-boot I made the following > observations: > [...] I had similar issues some time back but the build environment was not Cygwin. I was working on adding support for a board on one GIT branch and after building an image (without a distclean) shifted to another branch which didn't have the board support added. Compiling u-boot for a different board on the second branch threw up errors like you mentioned. Even distclean didn't help. This was probably due to the auto-generated files depending on a board config which wasn't in the branch I was working on. I was able to finally get things working by manually deleting include/config.h, include/config.mk, include/autoconf.mk and include/autoconf.mk.dep A couple of more instances where I got the errors was when during the course of development directory structure/config filename had to be changed but remnants of a build with old directory structure/config file were present. Again manually deleting the files mentioned above got things working. Deleting the files manually may not be correct way of fixing this issue but I thought it might help if you are stuck. Regards, Vaibhav _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot