Check needs to be done against CONFIG_MAX_MEM_MAPPED macro and not fixed size 4GB (as CONFIG_MAX_MEM_MAPPED can be lower and for example for e500 cores it is just 2GB). Also fix printf re-align, which should be applied only for non-SPL builds, during init_dram() call.
Signed-off-by: Pali Rohár <[email protected]> --- drivers/ddr/fsl/main.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/drivers/ddr/fsl/main.c b/drivers/ddr/fsl/main.c index f389e5ef9524..ec040f265da2 100644 --- a/drivers/ddr/fsl/main.c +++ b/drivers/ddr/fsl/main.c @@ -856,13 +856,22 @@ phys_size_t __fsl_ddr_sdram(fsl_ddr_info_t *pinfo) debug("total_memory by %s = %llu\n", __func__, total_memory); #if !defined(CONFIG_PHYS_64BIT) - /* Check for 4G or more. Bad. */ - if ((first_ctrl == 0) && (total_memory >= (1ull << 32))) { + /* Check for more than max memory. Bad. */ + if ((first_ctrl == 0) && (total_memory > CONFIG_MAX_MEM_MAPPED)) { puts("Detected "); print_size(total_memory, " of memory\n"); - printf(" This U-Boot only supports < 4G of DDR\n"); - printf(" You could rebuild it with CONFIG_PHYS_64BIT\n"); - printf(" "); /* re-align to match init_dram print */ +#ifndef CONFIG_SPL_BUILD + puts(" "); /* re-align to match init_dram print */ +#endif + puts("This U-Boot only supports <= "); + print_size(CONFIG_MAX_MEM_MAPPED, " of DDR\n"); +#ifndef CONFIG_SPL_BUILD + puts(" "); /* re-align to match init_dram print */ +#endif + puts("You could rebuild it with CONFIG_PHYS_64BIT\n"); +#ifndef CONFIG_SPL_BUILD + puts(" "); /* re-align to match init_dram print */ +#endif total_memory = CONFIG_MAX_MEM_MAPPED; } #endif -- 2.20.1
