The rk3128 DT node names should be generic.
Rename them to the pattern defined in the DT bindings.
Signed-off-by: Johan Jonker <[email protected]>
---
arch/arm/dts/rk3128-evb.dts | 5 +++
arch/arm/dts/rk3128.dtsi | 62 +++++++++++++++++--------------------
2 files changed, 33 insertions(+), 34 deletions(-)
diff --git a/arch/arm/dts/rk3128-evb.dts b/arch/arm/dts/rk3128-evb.dts
index e7d8f7c9..93291d78 100644
--- a/arch/arm/dts/rk3128-evb.dts
+++ b/arch/arm/dts/rk3128-evb.dts
@@ -15,6 +15,11 @@
stdout-path = &uart2;
};
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x40000000>;
+ };
+
vcc5v0_otg: vcc5v0-otg-drv {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_otg";
diff --git a/arch/arm/dts/rk3128.dtsi b/arch/arm/dts/rk3128.dtsi
index b58804b6..48833bff 100644
--- a/arch/arm/dts/rk3128.dtsi
+++ b/arch/arm/dts/rk3128.dtsi
@@ -8,7 +8,6 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rk3128-cru.h>
-#include "skeleton.dtsi"
/ {
compatible = "rockchip,rk3128";
@@ -34,11 +33,6 @@
mmc1 = &sdmmc;
};
- memory {
- device_type = "memory";
- reg = <0x60000000 0x40000000>;
- };
-
arm-pmu {
compatible = "arm,cortex-a7-pmu";
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
@@ -52,10 +46,10 @@
#size-cells = <0>;
enable-method = "rockchip,rk3128-smp";
- cpu0:cpu@0x000 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- reg = <0x000>;
+ reg = <0x0>;
operating-points = <
/* KHz uV */
816000 1000000
@@ -65,22 +59,22 @@
clocks = <&cru ARMCLK>;
};
- cpu1:cpu@0x001 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- reg = <0x001>;
+ reg = <0x1>;
};
- cpu2:cpu@0x002 {
+ cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- reg = <0x002>;
+ reg = <0x2>;
};
- cpu3:cpu@0x003 {
+ cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- reg = <0x003>;
+ reg = <0x3>;
};
};
@@ -165,7 +159,7 @@
interrupt-parent = <&gic>;
ranges;
- pdma: pdma@20078000 {
+ pdma: dma-controller@20078000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x20078000 0x4000>;
arm,pl330-broken-no-flushp;//2
@@ -207,7 +201,7 @@
rockchip,broadcast = <1>;
};
- watchdog: wdt@2004c000 {
+ watchdog: watchdog@2004c000 {
compatible = "rockchip,watch dog";
reg = <0x2004c000 0x100>;
clock-names = "pclk_wdt";
@@ -224,7 +218,7 @@
#reset-cells = <1>;
};
- nandc: nandc@10500000 {
+ nandc: nand-controller@10500000 {
compatible = "rockchip,rk-nandc";
reg = <0x10500000 0x4000>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
@@ -247,7 +241,7 @@
assigned-clock-rates = <594000000>;
};
- uart0: serial0@20060000 {
+ uart0: serial@20060000 {
compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
reg = <0x20060000 0x100>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
@@ -262,7 +256,7 @@
#dma-cells = <2>;
};
- uart1: serial1@20064000 {
+ uart1: serial@20064000 {
compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
reg = <0x20064000 0x100>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
@@ -277,7 +271,7 @@
#dma-cells = <2>;
};
- uart2: serial2@20068000 {
+ uart2: serial@20068000 {
compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
reg = <0x20068000 0x100>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -304,7 +298,7 @@
status = "disabled";
};
- pwm0: pwm0@20050000 {
+ pwm0: pwm@20050000 {
compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
reg = <0x20050000 0x10>;
#pwm-cells = <3>;
@@ -314,7 +308,7 @@
clock-names = "pwm";
};
- pwm1: pwm1@20050010 {
+ pwm1: pwm@20050010 {
compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
reg = <0x20050010 0x10>;
#pwm-cells = <3>;
@@ -324,7 +318,7 @@
clock-names = "pwm";
};
- pwm2: pwm2@20050020 {
+ pwm2: pwm@20050020 {
compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
reg = <0x20050020 0x10>;
#pwm-cells = <3>;
@@ -334,7 +328,7 @@
clock-names = "pwm";
};
- pwm3: pwm3@20050030 {
+ pwm3: pwm@20050030 {
compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
reg = <0x20050030 0x10>;
#pwm-cells = <3>;
@@ -430,7 +424,7 @@
status = "disabled";
};
- sdmmc: dwmmc@10214000 {
+ sdmmc: mmc@10214000 {
compatible = "rockchip,rk312x-dw-mshc",
"rockchip,rk3288-dw-mshc";
reg = <0x10214000 0x4000>;
max-frequency = <150000000>;
@@ -445,7 +439,7 @@
status = "disabled";
};
- emmc: dwmmc@1021c000 {
+ emmc: mmc@1021c000 {
compatible = "rockchip,rk3128-dw-mshc",
"rockchip,rk3288-dw-mshc";
reg = <0x1021c000 0x4000>;
max-frequency = <150000000>;
@@ -464,7 +458,7 @@
status = "disabled";
};
- i2c0: i2c0@20072000 {
+ i2c0: i2c@20072000 {
compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
reg = <20072000 0x1000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
@@ -476,7 +470,7 @@
pinctrl-0 = <&i2c0_xfer>;
};
- i2c1: i2c1@20056000 {
+ i2c1: i2c@20056000 {
compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
reg = <0x20056000 0x1000>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -488,7 +482,7 @@
pinctrl-0 = <&i2c1_xfer>;
};
- i2c2: i2c2@2005a000 {
+ i2c2: i2c@2005a000 {
compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
reg = <0x2005a000 0x1000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -500,7 +494,7 @@
pinctrl-0 = <&i2c2_xfer>;
};
- i2c3: i2c3@2005e000 {
+ i2c3: i2c@2005e000 {
compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
reg = <0x2005e000 0x1000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
@@ -546,7 +540,7 @@
#size-cells = <1>;
ranges;
- gpio0: gpio0@2007c000 {
+ gpio0: gpio@2007c000 {
compatible = "rockchip,gpio-bank";
reg = <0x2007c000 0x100>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
@@ -557,7 +551,7 @@
#interrupt-cells = <2>;
};
- gpio1: gpio1@20080000 {
+ gpio1: gpio@20080000 {
compatible = "rockchip,gpio-bank";
reg = <0x20080000 0x100>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
@@ -568,7 +562,7 @@
#interrupt-cells = <2>;
};
- gpio2: gpio2@20084000 {
+ gpio2: gpio@20084000 {
compatible = "rockchip,gpio-bank";
reg = <0x20084000 0x100>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
@@ -579,7 +573,7 @@
#interrupt-cells = <2>;
};
- gpio3: gpio2@20088000 {
+ gpio3: gpio@20088000 {
compatible = "rockchip,gpio-bank";
reg = <0x20088000 0x100>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
