Hi Fabio On Mon, Oct 3, 2022 at 4:02 PM Fabio Estevam <[email protected]> wrote: > > When the imx8mn.dtsi file was pulled in from Linux, the UARTs > were moved into an spba sub-node which wasn't being included > in the SPL device tree. This meant the references to the UART > weren't being handled properly and when booting the system would > constantly reboot. Fix this by adding the spba node to the spl > device tree to restore normal booting. > > Based on the patch from Adam Ford for the imx8mn-beacon-kit-u-boot > board. > > Fixes: 4e5114daf9eb ("imx8mn: synchronise device tree with linux") > Signed-off-by: Fabio Estevam <[email protected]> > --- > Changes since v1: > - Fix typo in commit log: imx8mm.dtsi--> imx8mn.dtsi > > Hi Tom and Stefano, > > I know today is release day. Could this one be applied directly? > > It fixes a boot regression. > > Thanks > > arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi > b/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi > index 78773c198e..3a9ba8b8c9 100644 > --- a/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi > +++ b/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi > @@ -26,6 +26,10 @@ > u-boot,dm-spl; > }; > > +&spba1 { > + u-boot,dm-spl; > +}; > + > &clk { > u-boot,dm-spl; > u-boot,dm-pre-reloc;
If this is valid for all the board could you just move in imx8mn-uboot.dtsi? Michael > -- > 2.25.1 > -- Michael Nazzareno Trimarchi Co-Founder & Chief Executive Officer M. +39 347 913 2170 [email protected] __________________________________ Amarula Solutions BV Joop Geesinkweg 125, 1114 AB, Amsterdam, NL T. +31 (0)85 111 9172 [email protected] www.amarulasolutions.com
