From: Alice Guo <[email protected]> The reset source of the external PMIC on i.MX93 is WDOG_ANY PAD and the source of WDOG_ANY PAD is interrupt. Therefore, using PMIC to reset needs to enable the watchdog interrupt.
Signed-off-by: Alice Guo <[email protected]> --- drivers/watchdog/ulp_wdog.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/watchdog/ulp_wdog.c b/drivers/watchdog/ulp_wdog.c index 843f95aa4f..49f8900cd3 100644 --- a/drivers/watchdog/ulp_wdog.c +++ b/drivers/watchdog/ulp_wdog.c @@ -39,6 +39,7 @@ struct wdog_regs { #define WDOG_CS_PRES BIT(12) #define WDGCS_CMD32EN BIT(13) #define WDGCS_FLG BIT(14) +#define WDGCS_INT BIT(6) #define WDG_BUS_CLK (0x0) #define WDG_LPO_CLK (0x1) @@ -92,7 +93,7 @@ void hw_watchdog_init(void) /* setting 1-kHz clock source, enable counter running, and clear interrupt */ #if defined(CONFIG_ARCH_IMX9) writel((cmd32 | WDGCS_WDGE | WDGCS_WDGUPDATE | (WDG_LPO_CLK << 8) | - WDGCS_FLG | WDOG_CS_PRES), &wdog->cs); + WDGCS_FLG | WDOG_CS_PRES | WDGCS_INT), &wdog->cs); #else writel((cmd32 | WDGCS_WDGE | WDGCS_WDGUPDATE |(WDG_LPO_CLK << 8) | WDGCS_FLG), &wdog->cs); #endif @@ -128,7 +129,7 @@ void reset_cpu(void) /* enable counter running */ #if defined(CONFIG_ARCH_IMX9) - writel((cmd32 | WDGCS_WDGE | (WDG_LPO_CLK << 8) | WDOG_CS_PRES), &wdog->cs); + writel((cmd32 | WDGCS_WDGE | (WDG_LPO_CLK << 8) | WDOG_CS_PRES | WDGCS_INT), &wdog->cs); #else writel((cmd32 | WDGCS_WDGE | (WDG_LPO_CLK << 8)), &wdog->cs); #endif -- 2.17.1
