Hi Jaehoon,
>-----Original Message-----
>From: Jaehoon Chung <[email protected]>
>Sent: Friday, October 7, 2022 6:16 PM
>To: Soma, Ashok Reddy <[email protected]>; [email protected]
>Cc: Simek, Michal <[email protected]>; [email protected];
>[email protected]; Halder, Ayan Kumar <[email protected]>; Mehta,
>Piyush <[email protected]>; [email protected];
>[email protected]
>Subject: Re: [PATCH 1/3] mmc: zynq_sdhci: Change node_id prototype to u32
>
>
>
>On 9/30/22 18:25, Ashok Reddy Soma wrote:
>> In Versal platform power domain node_id is bigger than u8, hence
>> change prototype to u32 to accommodate. Change u8 to u32 in the
>> function prototypes that use node_id and remove casting to u32 from
>> xilinx_pm_request() call parameters.
>>
>> Signed-off-by: Ashok Reddy Soma <[email protected]>
>> ---
>>
>> drivers/mmc/zynq_sdhci.c | 14 +++++++-------
>> 1 file changed, 7 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index
>> 8f4071c8c2..3a4194452c 100644
>> --- a/drivers/mmc/zynq_sdhci.c
>> +++ b/drivers/mmc/zynq_sdhci.c
>> @@ -111,7 +111,7 @@ static const u8 mode2timing[] = {
>> [MMC_HS_200] = MMC_TIMING_MMC_HS200, };
>>
>> -static inline int arasan_zynqmp_set_in_tapdelay(u8 node_id, u32
>> itap_delay)
>> +static inline int arasan_zynqmp_set_in_tapdelay(u32 node_id, u32
>> +itap_delay)
>
>Is it passed by u8 from sdhci_zynqmp_sampleclk_set_pahse()?
Seems like I missed to change the type to u32 from where these functions are
called. But those lines are removed in patch 2/3.
Should I send V2 or is it okay ?
Thanks,
Ashok
>
>
>Best Regards,
>Jaehoon Chung
>
>> {
>> int ret;
>>
>> @@ -155,7 +155,7 @@ static inline int arasan_zynqmp_set_in_tapdelay(u8
>> node_id, u32 itap_delay)
>> if (ret)
>> return ret;
>> } else {
>> - return xilinx_pm_request(PM_IOCTL, (u32)node_id,
>> + return xilinx_pm_request(PM_IOCTL, node_id,
>> IOCTL_SET_SD_TAPDELAY,
>> PM_TAPDELAY_INPUT, itap_delay, NULL);
>> }
>> @@ -163,7 +163,7 @@ static inline int arasan_zynqmp_set_in_tapdelay(u8
>> node_id, u32 itap_delay)
>> return 0;
>> }
>>
>> -static inline int arasan_zynqmp_set_out_tapdelay(u8 node_id, u32
>> otap_delay)
>> +static inline int arasan_zynqmp_set_out_tapdelay(u32 node_id, u32
>> +otap_delay)
>> {
>> if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) {
>> if (node_id == NODE_SD_0)
>> @@ -174,13 +174,13 @@ static inline int arasan_zynqmp_set_out_tapdelay(u8
>> node_id, u32 otap_delay)
>> return zynqmp_mmio_write(SD_OTAP_DLY, SD1_OTAPDLYSEL_MASK,
>> (otap_delay << 16));
>> } else {
>> - return xilinx_pm_request(PM_IOCTL, (u32)node_id,
>> + return xilinx_pm_request(PM_IOCTL, node_id,
>> IOCTL_SET_SD_TAPDELAY,
>> PM_TAPDELAY_OUTPUT, otap_delay, NULL);
>> }
>> }
>>
>> -static inline int zynqmp_dll_reset(u8 node_id, u32 type)
>> +static inline int zynqmp_dll_reset(u32 node_id, u32 type)
>> {
>> if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) {
>> if (node_id == NODE_SD_0)
>> @@ -192,12 +192,12 @@ static inline int zynqmp_dll_reset(u8 node_id, u32
>> type)
>> type == PM_DLL_RESET_ASSERT ?
>> SD1_DLL_RST : 0);
>> } else {
>> - return xilinx_pm_request(PM_IOCTL, (u32)node_id,
>> + return xilinx_pm_request(PM_IOCTL, node_id,
>> IOCTL_SD_DLL_RESET, type, 0, NULL);
>> }
>> }
>>
>> -static int arasan_zynqmp_dll_reset(struct sdhci_host *host, u8
>> node_id)
>> +static int arasan_zynqmp_dll_reset(struct sdhci_host *host, u32
>> +node_id)
>> {
>> struct mmc *mmc = (struct mmc *)host->mmc;
>> struct udevice *dev = mmc->dev;
