> Now that a unified imx8mn-u-boot is available, remove duplicated
> code for generating flash.bin and other common imx8mn peripherals.
> Signed-off-by: Adam Ford <aford...@gmail.com>
> diff --git a/arch/arm/dts/imx8mn-var-som-symphony-u-boot.dtsi
> b/arch/arm/dts/imx8mn-var-som-symphony-u-boot.dtsi
> index ed1ab10ded..a20683155c 100644
> --- a/arch/arm/dts/imx8mn-var-som-symphony-u-boot.dtsi
> +++ b/arch/arm/dts/imx8mn-var-som-symphony-u-boot.dtsi
> @@ -3,22 +3,7 @@
> * Copyright 2021 Collabora Ltd.
> */
>
> -/ {
> - binman: binman {
> - multiple-images;
> - };
> -
> - wdt-reboot {
> - compatible = "wdt-reboot";
> - wdt = <&wdog1>;
> - u-boot,dm-spl;
> - };
> -};
> -
> -&{/soc@0} {
> - u-boot,dm-pre-reloc;
> - u-boot,dm-spl;
> -};
> +#include "imx8mn-u-boot.dtsi"
>
> &{/soc@0/bus@30800000/i2c@30a20000/pmic@4b} {
> u-boot,dm-spl;
> @@ -28,27 +13,6 @@
> u-boot,dm-spl;
> };
>
> -&aips1 {
> - u-boot,dm-pre-reloc;
> - u-boot,dm-spl;
> -};
> -
> -&aips3 {
> - u-boot,dm-spl;
> -};
> -
> -&aips4 {
> - u-boot,dm-spl;
> -};
> -
> -&clk {
> - u-boot,dm-pre-reloc;
> - u-boot,dm-spl;
> - /delete-property/ assigned-clocks;
> - /delete-property/ assigned-clock-parents;
> - /delete-property/ assigned-clock-rates;
> -};
> -
> &gpio1 {
> u-boot,dm-spl;
> };
> @@ -65,15 +29,6 @@
> u-boot,dm-spl;
> };
>
> -&iomuxc {
> - u-boot,dm-spl;
> -};
> -
> -&osc_24m {
> - u-boot,dm-pre-reloc;
> - u-boot,dm-spl;
> -};
> -
> &pinctrl_i2c1 {
> u-boot,dm-spl;
> };
> @@ -113,144 +68,3 @@
> &usdhc3 {
> u-boot,dm-spl;
> };
> -
> -&wdog1 {
> - u-boot,dm-spl;
> -};
> -
> -&binman {
> - u-boot-spl-ddr {
> - align = <4>;
> - align-size = <4>;
> - filename = "u-boot-spl-ddr.bin";
> - pad-byte = <0xff>;
> -
> - u-boot-spl {
> - align-end = <4>;
> - filename = "u-boot-spl.bin";
> - };
> -
> - ddr-1d-imem-fw {
> - filename = "ddr4_imem_1d.bin";
> - align-end = <4>;
> - type = "blob-ext";
> - };
> -
> - ddr-1d-dmem-fw {
> - filename = "ddr4_dmem_1d.bin";
> - align-end = <4>;
> - type = "blob-ext";
> - };
> -
> - ddr-2d-imem-fw {
> - filename = "ddr4_imem_2d.bin";
> - align-end = <4>;
> - type = "blob-ext";
> - };
> -
> - ddr-2d-dmem-fw {
> - filename = "ddr4_dmem_2d.bin";
> - align-end = <4>;
> - type = "blob-ext";
> - };
> - };
> -
> - spl {
> - filename = "spl.bin";
> -
> - mkimage {
> - args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e
> 0x912000";
> -
> - blob {
> - filename = "u-boot-spl-ddr.bin";
> - };
> - };
> - };
> -
> - itb {
> - filename = "u-boot.itb";
> -
> - fit {
> - description = "Configuration to load ATF before U-Boot";
> - fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
> - fit,fdt-list = "of-list";
> - #address-cells = <1>;
> -
> - images {
> - uboot {
> - arch = "arm64";
> - compression = "none";
> - description = "U-Boot (64-bit)";
> - load = <CONFIG_SYS_TEXT_BASE>;
> - type = "standalone";
> -
> - uboot_blob {
> - filename = "u-boot-nodtb.bin";
> - type = "blob-ext";
> - };
> - };
> -
> - atf {
> - arch = "arm64";
> - compression = "none";
> - description = "ARM Trusted Firmware";
> - entry = <0x960000>;
> - load = <0x960000>;
> - type = "firmware";
> -
> - atf_blob {
> - filename = "bl31.bin";
> - type = "atf-bl31";
> - };
> - };
> -
> - binman_fip: fip {
> - arch = "arm64";
> - compression = "none";
> - description = "Trusted Firmware FIP";
> - load = <0x40310000>;
> - type = "firmware";
> - };
> -
> - @fdt-SEQ {
> - compression = "none";
> - description = "NAME";
> - type = "flat_dt";
> -
> - uboot_fdt_blob {
> - filename = "u-boot.dtb";
> - type = "blob-ext";
> - };
> - };
> - };
> -
> - configurations {
> - default = "@config-DEFAULT-SEQ";
> -
> - binman_configuration: @config-SEQ {
> - description = "NAME";
> - fdt = "fdt-SEQ";
> - firmware = "uboot";
> - loadables = "atf";
> - };
> - };
> - };
> - };
> -
> - imx-boot {
> - filename = "flash.bin";
> - pad-byte = <0x00>;
> -
> - spl {
> - filename = "spl.bin";
> - offset = <0x0>;
> - type = "blob-ext";
> - };
> -
> - binman_uboot: uboot {
> - filename = "u-boot.itb";
> - offset = <0x58000>;
> - type = "blob-ext";
> - };
> - };
> -};
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
