On 10/25/2022 4:47 AM, Tim Harvey wrote:
On Mon, Oct 24, 2022 at 1:26 PM Adam Ford <aford...@gmail.com> wrote:
On Mon, Oct 24, 2022 at 2:57 PM Tim Harvey <thar...@gateworks.com> wrote:
On Sat, Oct 22, 2022 at 7:28 AM Adam Ford <aford...@gmail.com> wrote:
There are a few functions which are not essential for use in
SPL, but they take up enough space to make other preferred
features not fit. Remove the extras.
Signed-off-by: Adam Ford <aford...@gmail.com>
diff --git a/board/beacon/imx8mm/spl.c b/board/beacon/imx8mm/spl.c
index a93cc93878..b0e9d918da 100644
--- a/board/beacon/imx8mm/spl.c
+++ b/board/beacon/imx8mm/spl.c
@@ -44,11 +44,6 @@ static void spl_dram_init(void)
ddr_init(&dram_timing);
}
-void spl_board_init(void)
-{
- debug("Normal Boot\n");
-}
-
#ifdef CONFIG_SPL_LOAD_FIT
int board_fit_config_name_match(const char *name)
{
diff --git a/configs/imx8mm_beacon_defconfig b/configs/imx8mm_beacon_defconfig
index e37ce01c19..f6a1012d8a 100644
--- a/configs/imx8mm_beacon_defconfig
+++ b/configs/imx8mm_beacon_defconfig
@@ -29,7 +29,6 @@ CONFIG_DEFAULT_FDT_FILE="imx8mm-beacon-kit.dtb"
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_START_ADDR=0x910000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
-CONFIG_SPL_BOARD_INIT=y
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0x920000
CONFIG_SYS_SPL_MALLOC=y
@@ -88,12 +87,9 @@ CONFIG_DM_PCA953X=y
CONFIG_DM_I2C=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_IO_VOLTAGE=y
-CONFIG_SPL_MMC_IO_VOLTAGE=y
CONFIG_MMC_UHS_SUPPORT=y
-CONFIG_SPL_MMC_UHS_SUPPORT=y
CONFIG_MMC_HS400_ES_SUPPORT=y
CONFIG_MMC_HS400_SUPPORT=y
-CONFIG_SPL_MMC_HS400_SUPPORT=y
CONFIG_FSL_USDHC=y
CONFIG_MTD=y
CONFIG_DM_MTD=y
@@ -113,14 +109,12 @@ CONFIG_PINCTRL_IMX8M=y
CONFIG_POWER_DOMAIN=y
CONFIG_IMX8M_POWER_DOMAIN=y
CONFIG_DM_PMIC=y
+# CONFIG_SPL_PMIC_CHILDREN is not set
CONFIG_DM_PMIC_BD71837=y
CONFIG_SPL_DM_PMIC_BD71837=y
CONFIG_DM_REGULATOR=y
-CONFIG_SPL_DM_REGULATOR=y
CONFIG_DM_REGULATOR_BD71837=y
-CONFIG_SPL_DM_REGULATOR_BD71837=y
CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_SPL_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_SERIAL=y
CONFIG_MXC_UART=y
--
2.34.1
Adam,
I'm looking at your patches as I'm also trying to strip down the
imx8mm-venice SPL so that I can fit DM USB support. It seems that
all/most of the imx8m boards have a spl_board_init() which calls
arch_misc_init(). I'm curious why your not calling that function?
As of right now, we're not using the CAAM which is initialized in
arch_misc_init. If/When we do, we'll likely have to pull that in.
ok - makes sense.
Another config that I've found to save a lot of space for imx8m
without any negative impact I can see is CONFIG_SPL_MMC_TINY=y
I experimented a bit with that too, but I hadn't fully tested
switching between booting between MMC1 and MMC2, so I wasn't quite
ready to enable it, but I'll spend some more time with it to see how
much more space I can shave off SPL.
Getting rid of the PMIC children in SPL helped me quite a bit.
I see. It appears to save about 2K and Fabio's imx8mm clk reduction
series that made it in saves another 800 bytes or so.
Regardless I'm still oversize for imx8mm-venice by 2K bytes and
looking for things to prune. My issue is that I have 4 DRAM configs to
support which suck up 3K each I believe.
Why has so many DRAM configs? Use one image to support multiple boards?
Regards,
Peng.
Tim
