On 25/10/22, Fabio Estevam wrote: > Hi Oliver, > > On Fri, Oct 7, 2022 at 10:14 AM Oliver Graute > <oliver.gra...@kococonnector.com> wrote: > > > + fdt { > > + filename = "imx8qm-rom7720-a1"; > > Please do not hardcode this dtb filename inside the common > imx8qm-u-boot.dtsi file.
OK I'll remove the line > > You can look at arch/arm/dts/imx8mm-u-boot.dtsi as a reference. OK > > > + type = "flat_dt"; > > + compression = "none"; > > + > > + uboot_fdt_blob { > > + filename = "u-boot.dtb"; > > + type = "blob-ext"; > > + }; > > + }; > > + }; > > + > > + configurations { > > + default = "conf"; > > + > > + conf { > > + filename = "imx8qm-rom7720-a1"; > > Same here. Ok > > Also, could you please try converting all imx8mq/qxp boards to binman? ok I'll try this. > Thanks Best regards, Oliver