Switch to use binman pack images
Signed-off-by: Oliver Graute <oliver.gra...@kococonnector.com>
Reviewed-by: Peng Fan <peng....@nxp.com>
---
arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi | 127 +++++++++++++++++++++++
arch/arm/mach-imx/imx8/Kconfig | 1 +
board/freescale/imx8qxp_mek/imximage.cfg | 3 +-
configs/imx8qxp_mek_defconfig | 2 +
doc/board/nxp/imx8qxp_mek.rst | 2 +-
5 files changed, 132 insertions(+), 3 deletions(-)
diff --git a/arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi
b/arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi
index ae037c7550..073a401a1c 100644
--- a/arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi
+++ b/arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi
@@ -3,6 +3,133 @@
* Copyright 2018, 2021 NXP
*/
+/ {
+ binman: binman {
+ multiple-images;
+ };
+};
+
+&binman {
+ u-boot-spl-ddr {
+ align = <4>;
+ align-size = <4>;
+ filename = "u-boot-spl-ddr.bin";
+ pad-byte = <0xff>;
+
+ u-boot-spl {
+ align-end = <4>;
+ filename = "u-boot-spl.bin";
+ };
+ };
+
+ spl {
+ filename = "spl.bin";
+
+ mkimage {
+ args = "-n spl/u-boot-spl.cfgout -T imx8image -e
0x100000";
+
+ blob {
+ filename = "u-boot-spl-ddr.bin";
+ };
+ };
+ };
+
+ itb {
+ filename = "u-boot.itb";
+
+ fit {
+ description = "Configuration to load ATF before U-Boot";
+ fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+ fit,fdt-list = "of-list";
+ #address-cells = <1>;
+
+ images {
+ uboot {
+ arch = "arm64";
+ compression = "none";
+ description = "U-Boot (64-bit)";
+ load = <CONFIG_SYS_TEXT_BASE>;
+ type = "standalone";
+
+ uboot-blob {
+ filename = "u-boot-nodtb.bin";
+ type = "blob-ext";
+ };
+ };
+
+ atf {
+ arch = "arm64";
+ compression = "none";
+ description = "ARM Trusted Firmware";
+ entry = <0x00910000>;
+ load = <0x00091000>;
+ type = "firmware";
+
+ atf-blob {
+ filename = "bl31.bin";
+ type = "atf-bl31";
+ };
+ };
+
+ scfw {
+ arch = "arm64";
+ compression = "none";
+ description = "System Controler
Firmware";
+ type = "firmware";
+
+ scfw_blob {
+ filename =
"mx8qx-mek-scfw-tcm.bin";
+ type = "blob-ext";
+ };
+ };
+
+ seco {
+ arch = "arm64";
+ compression = "none";
+ description = "Seco Firmware";
+ type = "firmware";
+
+ seco_blob {
+ filename =
"mx8qxc0-ahab-container.img";
+ type = "blob-ext";
+ };
+ };
+
+ fdt {
+ type = "flat_dt";
+ compression = "none";
+
+ uboot-fdt-blob {
+ filename = "u-boot.dtb";
+ type = "blob-ext";
+ };
+ };
+ };
+
+ configurations {
+ default = "conf";
+
+ conf {
+ fdt = "fdt";
+ firmware = "uboot";
+ loadables = "atf";
+ };
+ };
+ };
+ };
+
+ imx-boot {
+ filename = "flash.bin";
+ pad-byte = <0x00>;
+
+ spl {
+ filename = "spl.bin";
+ offset = <0x0>;
+ type = "blob-ext";
+ };
+ };
+};
+
&{/imx8qx-pm} {
u-boot,dm-spl;
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index d423cf8563..23a7fcf361 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -90,6 +90,7 @@ config TARGET_IMX8QM_ROM7720_A1
config TARGET_IMX8QXP_MEK
bool "Support i.MX8QXP MEK board"
+ select BINMAN
select BOARD_LATE_INIT
select IMX8QXP
select FSL_CAAM
diff --git a/board/freescale/imx8qxp_mek/imximage.cfg
b/board/freescale/imx8qxp_mek/imximage.cfg
index 89a4736ab7..88d6955a9e 100644
--- a/board/freescale/imx8qxp_mek/imximage.cfg
+++ b/board/freescale/imx8qxp_mek/imximage.cfg
@@ -7,8 +7,7 @@
*/
-/* Boot from SD, sector size 0x400 */
-BOOT_FROM SD 0x400
+BOOT_FROM sd
/* SoC type IMX8QX */
SOC_TYPE IMX8QX
/* Append seco container image */
diff --git a/configs/imx8qxp_mek_defconfig b/configs/imx8qxp_mek_defconfig
index 73600c5a8c..0e22f13c7f 100644
--- a/configs/imx8qxp_mek_defconfig
+++ b/configs/imx8qxp_mek_defconfig
@@ -23,6 +23,8 @@ CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_REMAKE_ELF=y
+CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_BOOTDELAY=3
diff --git a/doc/board/nxp/imx8qxp_mek.rst b/doc/board/nxp/imx8qxp_mek.rst
index 215627cfa6..708db1952e 100644
--- a/doc/board/nxp/imx8qxp_mek.rst
+++ b/doc/board/nxp/imx8qxp_mek.rst
@@ -50,7 +50,7 @@ Build U-Boot
.. code-block:: bash
$ make imx8qxp_mek_defconfig
- $ make flash.bin
+ $ make
Flash the binary into the SD card
---------------------------------
--
2.17.1
