The Cadence GEM/MACB driver now utilizes the platform-level reset on the ZynqMP platform. Add reset definitions to the ZynqMP platform device tree to allow this to be used. Linux upstream commit (e461bd6f43f4e568f7436a8b6bc21c4ce6914c36).
Signed-off-by: Robert Hancock <[email protected]> Signed-off-by: Michal Simek <[email protected]> --- https://lore.kernel.org/netdev/[email protected]/ --- arch/arm/dts/zynqmp.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi index 9434c48e4f59..e2eb27b3151e 100644 --- a/arch/arm/dts/zynqmp.dtsi +++ b/arch/arm/dts/zynqmp.dtsi @@ -540,6 +540,7 @@ iommus = <&smmu 0x874>; power-domains = <&zynqmp_firmware PD_ETH_0>; resets = <&zynqmp_reset ZYNQMP_RESET_GEM0>; + reset-names = "gem0_rst"; }; gem1: ethernet@ff0c0000 { @@ -554,6 +555,7 @@ iommus = <&smmu 0x875>; power-domains = <&zynqmp_firmware PD_ETH_1>; resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>; + reset-names = "gem1_rst"; }; gem2: ethernet@ff0d0000 { @@ -568,6 +570,7 @@ iommus = <&smmu 0x876>; power-domains = <&zynqmp_firmware PD_ETH_2>; resets = <&zynqmp_reset ZYNQMP_RESET_GEM2>; + reset-names = "gem2_rst"; }; gem3: ethernet@ff0e0000 { @@ -582,6 +585,7 @@ iommus = <&smmu 0x877>; power-domains = <&zynqmp_firmware PD_ETH_3>; resets = <&zynqmp_reset ZYNQMP_RESET_GEM3>; + reset-names = "gem3_rst"; }; gpio: gpio@ff0a0000 { -- 2.36.1
