On Thu, 17 Nov 2022 22:22:27 -0600 Samuel Holland <[email protected]> wrote:
> P2WI and RSB are used to communicate with a PMIC. Most SoCs have only > one possible pinmux. F1C100s has two possibilities, with different mux > values, so omit it until some board needs one of them. > > Signed-off-by: Samuel Holland <[email protected]> Compared against the manuals. Reviewed-by: Andre Przywara <[email protected]> Cheers, Andre > --- > > Changes in v2: > - Fix pin list comment for A80 entry > > drivers/pinctrl/sunxi/pinctrl-sunxi.c | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c > b/drivers/pinctrl/sunxi/pinctrl-sunxi.c > index 061104be056..c4fbda7a925 100644 > --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c > +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c > @@ -338,6 +338,7 @@ static const struct sunxi_pinctrl_function > sun6i_a31_r_pinctrl_functions[] = { > { "gpio_in", 0 }, > { "gpio_out", 1 }, > { "s_i2c", 2 }, /* PL0-PL1 */ > + { "s_p2wi", 3 }, /* PL0-PL1 */ > { "s_uart", 2 }, /* PL2-PL3 */ > }; > > @@ -404,6 +405,7 @@ static const struct sunxi_pinctrl_function > sun8i_a23_r_pinctrl_functions[] = { > { "gpio_in", 0 }, > { "gpio_out", 1 }, > { "s_i2c", 3 }, /* PL0-PL1 */ > + { "s_rsb", 2 }, /* PL0-PL1 */ > { "s_uart", 2 }, /* PL2-PL3 */ > }; > > @@ -469,6 +471,7 @@ static const struct sunxi_pinctrl_function > sun8i_a83t_r_pinctrl_functions[] = { > { "gpio_in", 0 }, > { "gpio_out", 1 }, > { "s_i2c", 2 }, /* PL8-PL9 */ > + { "s_rsb", 2 }, /* PL0-PL1 */ > { "s_uart", 2 }, /* PL2-PL3 */ > }; > > @@ -574,6 +577,7 @@ static const struct sunxi_pinctrl_function > sun9i_a80_r_pinctrl_functions[] = { > { "gpio_out", 1 }, > { "s_i2c0", 2 }, /* PN0-PN1 */ > { "s_i2c1", 3 }, /* PM8-PM9 */ > + { "s_rsb", 3 }, /* PN0-PN1 */ > { "s_uart", 3 }, /* PL0-PL1 */ > }; > > @@ -615,6 +619,7 @@ static const struct sunxi_pinctrl_function > sun50i_a64_r_pinctrl_functions[] = { > { "gpio_in", 0 }, > { "gpio_out", 1 }, > { "s_i2c", 2 }, /* PL8-PL9 */ > + { "s_rsb", 2 }, /* PL0-PL1 */ > { "s_uart", 2 }, /* PL2-PL3 */ > }; > > @@ -680,6 +685,7 @@ static const struct sunxi_pinctrl_function > sun50i_h6_r_pinctrl_functions[] = { > { "gpio_in", 0 }, > { "gpio_out", 1 }, > { "s_i2c", 3 }, /* PL0-PL1 */ > + { "s_rsb", 2 }, /* PL0-PL1 */ > { "s_uart", 2 }, /* PL2-PL3 */ > }; > > @@ -717,6 +723,7 @@ static const struct sunxi_pinctrl_function > sun50i_h616_r_pinctrl_functions[] = { > { "gpio_in", 0 }, > { "gpio_out", 1 }, > { "s_i2c", 3 }, /* PL0-PL1 */ > + { "s_rsb", 2 }, /* PL0-PL1 */ > { "s_uart", 2 }, /* PL2-PL3 */ > }; >
