On 2022/11/15 22:46, Quentin Schulz wrote:
From: Quentin Schulz <[email protected]>
This synchronizes the Device Trees related to Puma RK3399 SoM with Linux
kernel next-20221114 to include two important changes pertaining to
eMMC and SD card instability.
Cc: Quentin Schulz <[email protected]>
Signed-off-by: Quentin Schulz <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
Thanks,
- Kever
---
To: Simon Glass <[email protected]>
To: Philipp Tomsich <[email protected]>
To: Kever Yang <[email protected]>
To: Klaus Goger <[email protected]>
Cc: [email protected]
---
arch/arm/dts/rk3399-puma-haikou.dts | 5 +++--
arch/arm/dts/rk3399-puma.dtsi | 32 +++++++++++++++++++++++++++++++-
2 files changed, 34 insertions(+), 3 deletions(-)
diff --git a/arch/arm/dts/rk3399-puma-haikou.dts
b/arch/arm/dts/rk3399-puma-haikou.dts
index 292bb7e80c..115c14c0a3 100644
--- a/arch/arm/dts/rk3399-puma-haikou.dts
+++ b/arch/arm/dts/rk3399-puma-haikou.dts
@@ -49,7 +49,7 @@
sgtl5000_clk: sgtl5000-oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <24576000>;
+ clock-frequency = <24576000>;
};
dc_12v: dc-12v {
@@ -207,7 +207,7 @@
cap-sd-highspeed;
cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
disable-wp;
- max-frequency = <150000000>;
+ max-frequency = <40000000>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
vmmc-supply = <&vcc3v3_baseboard>;
@@ -232,6 +232,7 @@
&usbdrd_dwc3_0 {
dr_mode = "otg";
+ extcon = <&extcon_usb3>;
status = "okay";
};
diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
index fb67db4619..aa3e21bd6c 100644
--- a/arch/arm/dts/rk3399-puma.dtsi
+++ b/arch/arm/dts/rk3399-puma.dtsi
@@ -25,6 +25,13 @@
};
};
+ extcon_usb3: extcon-usb3 {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb3_id>;
+ };
+
clkin_gmac: external-gmac-clock {
compatible = "fixed-clock";
clock-frequency = <125000000>;
@@ -55,7 +62,6 @@
vcc5v0_host: vcc5v0-host-regulator {
compatible = "regulator-fixed";
gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
- enable-active-low;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_host_en>;
regulator-name = "vcc5v0_host";
@@ -71,6 +77,17 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 1>;
+ pwm-supply = <&vcc5v0_sys>;
+ regulator-name = "vdd_log";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
};
&cpu_b0 {
@@ -422,9 +439,22 @@
<4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+
+ usb3 {
+ usb3_id: usb3-id {
+ rockchip,pins =
+ <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};
&sdhci {
+ /*
+ * Signal integrity isn't great at 200MHz but 100MHz has proven stable
+ * enough.
+ */
+ max-frequency = <100000000>;
+
bus-width = <8>;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
---
base-commit: c4ee4fe92e9be120be6d12718273dec6b63cc7d9
change-id: 20221115-puma-dts-sync-b73a5c739ad8
Best regards,
