From: Takahiro Kuwano <[email protected]> Rename s25hx_t prefix to s25 so that the single set of fixup hooks can support all other S25 families.
Signed-off-by: Takahiro Kuwano <[email protected]> --- drivers/mtd/spi/spi-nor-core.c | 42 +++++++++++++++++----------------- 1 file changed, 21 insertions(+), 21 deletions(-) diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c index 1ea8363d9f89..4e8b4a6769dd 100644 --- a/drivers/mtd/spi/spi-nor-core.c +++ b/drivers/mtd/spi/spi-nor-core.c @@ -3195,7 +3195,7 @@ static int spi_nor_setup(struct spi_nor *nor, const struct flash_info *info, } #ifdef CONFIG_SPI_FLASH_SPANSION -static int s25hx_t_mdp_ready(struct spi_nor *nor) +static int s25_mdp_ready(struct spi_nor *nor) { u32 addr; int ret; @@ -3209,7 +3209,7 @@ static int s25hx_t_mdp_ready(struct spi_nor *nor) return 1; } -static int s25hx_t_quad_enable(struct spi_nor *nor) +static int s25_quad_enable(struct spi_nor *nor) { u32 addr; int ret; @@ -3223,15 +3223,15 @@ static int s25hx_t_quad_enable(struct spi_nor *nor) return 0; } -static int s25hx_t_erase_non_uniform(struct spi_nor *nor, loff_t addr) +static int s25_erase_non_uniform(struct spi_nor *nor, loff_t addr) { /* Support 32 x 4KB sectors at bottom */ return spansion_erase_non_uniform(nor, addr, SPINOR_OP_BE_4K_4B, 0, SZ_128K); } -static int s25hx_t_setup(struct spi_nor *nor, const struct flash_info *info, - const struct spi_nor_flash_parameter *params) +static int s25_setup(struct spi_nor *nor, const struct flash_info *info, + const struct spi_nor_flash_parameter *params) { int ret; u8 cfr3v; @@ -3247,27 +3247,27 @@ static int s25hx_t_setup(struct spi_nor *nor, const struct flash_info *info, if (ret) return ret; if (!(cfr3v & CFR3V_UNHYSA)) - nor->erase = s25hx_t_erase_non_uniform; + nor->erase = s25_erase_non_uniform; /* * For the multi-die package parts, the ready() hook is needed to check * all dies' status via read any register. */ if (nor->mtd.size > SZ_128M) - nor->ready = s25hx_t_mdp_ready; + nor->ready = s25_mdp_ready; return spi_nor_default_setup(nor, info, params); } -static void s25hx_t_default_init(struct spi_nor *nor) +static void s25_default_init(struct spi_nor *nor) { - nor->setup = s25hx_t_setup; + nor->setup = s25_setup; } -static int s25hx_t_post_bfpt_fixup(struct spi_nor *nor, - const struct sfdp_parameter_header *header, - const struct sfdp_bfpt *bfpt, - struct spi_nor_flash_parameter *params) +static int s25_post_bfpt_fixup(struct spi_nor *nor, + const struct sfdp_parameter_header *header, + const struct sfdp_bfpt *bfpt, + struct spi_nor_flash_parameter *params) { int ret; u32 addr; @@ -3318,21 +3318,21 @@ static int s25hx_t_post_bfpt_fixup(struct spi_nor *nor, return 0; } -static void s25hx_t_post_sfdp_fixup(struct spi_nor *nor, - struct spi_nor_flash_parameter *params) +static void s25_post_sfdp_fixup(struct spi_nor *nor, + struct spi_nor_flash_parameter *params) { /* READ_FAST_4B (0Ch) requires mode cycles*/ params->reads[SNOR_CMD_READ_FAST].num_mode_clocks = 8; /* PP_1_1_4 is not supported */ params->hwcaps.mask &= ~SNOR_HWCAPS_PP_1_1_4; /* Use volatile register to enable quad */ - params->quad_enable = s25hx_t_quad_enable; + params->quad_enable = s25_quad_enable; } -static struct spi_nor_fixups s25hx_t_fixups = { - .default_init = s25hx_t_default_init, - .post_bfpt = s25hx_t_post_bfpt_fixup, - .post_sfdp = s25hx_t_post_sfdp_fixup, +static struct spi_nor_fixups s25_fixups = { + .default_init = s25_default_init, + .post_bfpt = s25_post_bfpt_fixup, + .post_sfdp = s25_post_sfdp_fixup, }; static int s25fl256l_setup(struct spi_nor *nor, const struct flash_info *info, @@ -3850,7 +3850,7 @@ void spi_nor_set_fixups(struct spi_nor *nor) switch (nor->info->id[1]) { case 0x2a: /* S25HL (QSPI, 3.3V) */ case 0x2b: /* S25HS (QSPI, 1.8V) */ - nor->fixups = &s25hx_t_fixups; + nor->fixups = &s25_fixups; break; #ifdef CONFIG_SPI_FLASH_S28HX_T -- 2.25.1
