The ROM pointers are in fact populated by the ATF BL31 blob, in case
U-Boot itself if the PSCI provider, there is no ATF BL31 blob, hence
ignore the ROM pointers.

Signed-off-by: Marek Vasut <ma...@denx.de>
---
Cc: "Ariel D'Alessandro" <ariel.dalessan...@collabora.com>
Cc: "NXP i.MX U-Boot Team" <uboot-...@nxp.com>
Cc: "Ying-Chun Liu (PaulLiu)" <paul....@linaro.org>
Cc: Adam Ford <aford...@gmail.com>
Cc: Andrejs Cainikovs <andrejs.cainik...@toradex.com>
Cc: Fabio Estevam <feste...@gmail.com>
Cc: Manoj Sai <abbaraju.manoj...@amarulasolutions.com>
Cc: Marcel Ziswiler <marcel.ziswi...@toradex.com>
Cc: Michael Trimarchi <mich...@amarulasolutions.com>
Cc: Peng Fan <peng....@nxp.com>
Cc: Ricardo Salveti <rica...@foundries.io>
Cc: Simon Glass <s...@chromium.org>
Cc: Stefano Babic <sba...@denx.de>
Cc: Tim Harvey <thar...@gateworks.com>
Cc: Ye Li <ye...@nxp.com>
---
 arch/arm/mach-imx/imx8m/soc.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c
index 5e92f8143cf..96c6e69aae4 100644
--- a/arch/arm/mach-imx/imx8m/soc.c
+++ b/arch/arm/mach-imx/imx8m/soc.c
@@ -238,7 +238,7 @@ int dram_init(void)
                return ret;
 
        /* rom_pointer[1] contains the size of TEE occupies */
-       if (rom_pointer[1])
+       if (!IS_ENABLED(CONFIG_ARMV8_PSCI) && rom_pointer[1])
                gd->ram_size = sdram_size - rom_pointer[1];
        else
                gd->ram_size = sdram_size;
@@ -267,7 +267,7 @@ int dram_init_banksize(void)
        }
 
        gd->bd->bi_dram[bank].start = PHYS_SDRAM;
-       if (rom_pointer[1]) {
+       if (!IS_ENABLED(CONFIG_ARMV8_PSCI) && rom_pointer[1]) {
                phys_addr_t optee_start = (phys_addr_t)rom_pointer[0];
                phys_size_t optee_size = (size_t)rom_pointer[1];
 
@@ -312,7 +312,7 @@ phys_size_t get_effective_memsize(void)
                        sdram_b1_size = sdram_size;
                }
 
-               if (rom_pointer[1]) {
+               if (!IS_ENABLED(CONFIG_ARMV8_PSCI) && rom_pointer[1]) {
                        /* We will relocate u-boot to Top of dram1. Tee 
position has two cases:
                         * 1. At the top of dram1,  Then return the size 
removed optee size.
                         * 2. In the middle of dram1, return the size of dram1.
@@ -344,7 +344,8 @@ phys_size_t board_get_usable_ram_top(phys_size_t total_size)
         * rom_pointer[1] stores the size TEE uses.
         * We need to reserve the memory region for TEE.
         */
-       if (rom_pointer[0] && rom_pointer[1] && top_addr > rom_pointer[0])
+       if (!IS_ENABLED(CONFIG_ARMV8_PSCI) && rom_pointer[0] &&
+           rom_pointer[1] && top_addr > rom_pointer[0])
                top_addr = rom_pointer[0];
 
        return top_addr;
-- 
2.35.1

Reply via email to