From: Quentin Schulz <quentin.sch...@theobroma-systems.com> Puma supports upstream TF-A and is configured to output serial on UART0 instead of the default UART2. Since U-Boot is properly configured to output on UART0, let's pass the DT to TF-A so there is no need for a custom TF-A to make the latter output to UART0 too.
Cc: Quentin Schulz <foss+ub...@0leil.net> Signed-off-by: Quentin Schulz <quentin.sch...@theobroma-systems.com> --- configs/puma-rk3399_defconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig index 17b37a625d..0e77db66db 100644 --- a/configs/puma-rk3399_defconfig +++ b/configs/puma-rk3399_defconfig @@ -37,7 +37,6 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_SPI_LOAD=y -CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y CONFIG_TPL=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y -- b4 0.10.1
