These are my news Hi all, I have this condition now when I do make zImage and make bootstrap (i link zImage at 0x00040000 after a simple bootloader) the system work and zImage decompress itself at 0x0C100000 when I make make uiImage of the same kernel and I execute it usinf u-bbot it doesn't work. There could be 2 reasons 1) address problem bootargs problem, but my kernel is built using BOOTCMD_OVERWRITE option.
Any ideas? Thanks On Monday 17 January 2011 19:24:14 Fabio Giovagnini wrote: > Ok, rigth. > I'mm newbe of u-bbot and I'd loke to contribute. > What could be the usefull info for you? > > Thanks in advance > > On Monday 17 January 2011 19:21:27 Wolfgang Denk wrote: > > Dear Fabio Giovagnini, > > > > In message <201101171908.02343.fabio.giovagn...@aurion-tech.com> you wrote: > > > Hi All this is what I do: > > > 1) I run u-Boot getting this output: > > > U-Boot 2010.12-09860-g9cb5761-dirty (Jan 17 2011 - 18:05:12) > > > > > > CPU: SH2A > > > BOARD: MLCD7203 > > > > This appears to be an out-of-tree port, i. e. code which is completely > > unknown to us. > > > > > Any ideas about why the kernelò do not send out anything? > > > > We don't know your code, we don't know which exact commands you're > > running, we don't see your environment, we don't know nothing. > > > > How could we then come up with helpful comments? > > > > Best regards, > > > > Wolfgang Denk -- Ing. Fabio Giovagnini Aurion s.r.l. P.I e C.F. 00885711200 skype: aurion.giovagnini Tel. +39.051.594.78.24 Fax. +39.051.082.14.49 Cell. +39.335.83.50.919 www.aurion-tech.com _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot